Cumminalong
Doghouse Diesel Performance
MUWAHA......MUWAHAHA.....MUWAHAHAHAHAHAHA!!!!!!
IT'S ALIVE!
IT'S ALIVE!
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
The Stealth BOMB'r is under the knife
- Thread starter Cumminalong
- Start date
83GMCK2500
Active Member
searstractorfan
New Member
Ah man, this is like going to a porch at halloween and getting tooth brushes or something horrible...Hes teasing us with its alive and not even a picture of the first huff of smoke it breathed......We need a nice full length video!! hint hint hint!!!!
12ga diesel
Jack of all, Master of none
[video=youtube;angi1vwUkQc]http://www.youtube.com/watch?v=angi1vwUkQc[/video]
Mad Maxx
See, what had happened was...
Oh man, that's on TV right now. I'm Watching it.
Cumminalong
Doghouse Diesel Performance
I'm processing the video right now. It's HD so it takes a bit.
Took it out for a ride and it was smooth as glass.
Here's some pics to hold ya over until I get the video done.
Took it out for a ride and it was smooth as glass.
Here's some pics to hold ya over until I get the video done.
Cumminalong
Doghouse Diesel Performance
Video is uploading to You Tube now.
Cumminalong
Doghouse Diesel Performance
[video=youtube;2AfiH33cHf4]http://www.youtube.com/watch?v=2AfiH33cHf4[/video]
NVW
Well-Known Member
Smooth engine, not a shake after it started.:thumbsup:
Ozzie
Snow looming...run!!
Just bootyfull...enough to make a grown man cry...:thumbsup:
83GMCK2500
Active Member
Ohhhhh yeah...that tickles me good and deep in my truck place.
randomid25
Rattle-Trap Cap'n
Now i'm ready for a drive vid along with a dyno vid. 
Cumminalong
Doghouse Diesel Performance
Electric fans, no grid heater, entire fuel system removed, all new electircal system AND NO CODES BABY!
She's runnin' like a champ.
I'll have the first 50 miles on it tomorrow, the valves will get checked / lashed as needed, studs will get retorqued and she'll be good to the 500 mile mark.
Had to take the wife out for ice cream for putting up with my ish for the last 2 months.
She's runnin' like a champ.
I'll have the first 50 miles on it tomorrow, the valves will get checked / lashed as needed, studs will get retorqued and she'll be good to the 500 mile mark.
Had to take the wife out for ice cream for putting up with my ish for the last 2 months.
12ga diesel
Jack of all, Master of none
Excellent that it's running smooth!! Congrats again!
Cumminalong
Doghouse Diesel Performance
MAN, I'm all kinds of excited.
I finally get to drive my truck to around.
This friggin thing needs a bath! BAD!
I finally get to drive my truck to around.
This friggin thing needs a bath! BAD!
Pepperidge
Member Advocate
Sounds great Rich and Congrats on finishing your build :thumbsup:
3500GMC
What T F, over
Fired right up. Good deal. Nice and smooth. I'm sure we'll see more of this thing.. Wink wink.
Cumminalong
Doghouse Diesel Performance
Brother, it's never finished.....
I already have plans for the winter projects on it.
12ga diesel
Jack of all, Master of none
So when is the first dyno test to see what all this hard work of yours has pulled off?
Cumminalong
Doghouse Diesel Performance
As soon as I get 1000 miles on the motor.
Once everything is good and seated, I'll put it on the dyno for tuning.
First 3 pulls will be hardware only, no tuning, no water, no meth, no nitrous, so I can get a good base line of where it's at.
On motor only it should be close to or at 500 HP. Last time I did a motor only pull was about 2 years ago, wth 90 HP sticks in the truck and it pulled 426 HP.
At full tune, it should be low 800's.
We'll see what a hit of the giggle gas does with a little less timing.
Once everything is good and seated, I'll put it on the dyno for tuning.
First 3 pulls will be hardware only, no tuning, no water, no meth, no nitrous, so I can get a good base line of where it's at.
On motor only it should be close to or at 500 HP. Last time I did a motor only pull was about 2 years ago, wth 90 HP sticks in the truck and it pulled 426 HP.
At full tune, it should be low 800's.
We'll see what a hit of the giggle gas does with a little less timing.