• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

HX40II Downpipe $$

racedaymechanic

racedaymechanic

Active Member
Messages
623
Reaction score
38
Location
Troutman, NC
I have built a couple more downpipes for the HX40II and am ready to sell, the Price is $100.00 and that includes a 2 1/2 Inch SS V band
 
Jorge6.5 said:
Will these exhaust elbows fit the holset hx-40W? Thanks and by the way nice job on them
Click to expand...

No They wont, I think the HX40 is a 4 inch Exhaust outlet, But thanks, and dont think the 40II is not enough, Im taking my new 5th wheel into the Moutains this weekend and I will be hooked up to my MT2500 thru the trip
 
Heres the Fuel Filter Bracket in the jig, Its a bolt up easy install
002-8.jpg


another angle
001-9.jpg


this is how it sits on the engine

IMG_0569.jpg
 
I went to the 3/4 square tubing because when I took the original one off to make the Jig the thin wall 1/2 inch round tubing was cracking, thats not Good so bigger and thicker
 
racedaymechanic said:
No They wont, I think the HX40 is a 4 inch Exhaust outlet, But thanks, and dont think the 40II is not enough, Im taking my new 5th wheel into the Moutains this weekend and I will be hooked up to my MT2500 thru the trip
Click to expand...


I also have a snap on mt2500, what will you be using yours for while driving?
 
That is very nice work on the downpipe! So this piece just gets you to the area where the factory or aftermarket 6.5 downpipe would attach on a GM-X style turbo right?
 
I'm not familiar with the HX40II. Is it anything like the TE06H from a Banks 6.9 kit? (On the outlet anyway) I've got one of those I want to try on my rig, but I have to figure out the downpipe connection.
 
restoguy said:
I'm not familiar with the HX40II. Is it anything like the TE06H from a Banks 6.9 kit? (On the outlet anyway) I've got one of those I want to try on my rig, but I have to figure out the downpipe connection.
Click to expand...

no, the mitsu te06h is a way better turbo, if you go to oliver diesel there is a how-to on installing it... but if you dont want to, you could always sell it to me...LOL
 
I think I've seen that write up. But if memory serves correctly, they installed it on a 'square nose' chevy. (like a '90 burb or something) So the downpipe was all different anyway. I'd like to have an adaptor like this one so I can quickly swap between turbos while I test them to see what I like best. Guess I'll have to make my own....
 
restoguy said:
I think I've seen that write up. But if memory serves correctly, they installed it on a 'square nose' chevy. (like a '90 burb or something) So the downpipe was all different anyway. I'd like to have an adaptor like this one so I can quickly swap between turbos while I test them to see what I like best. Guess I'll have to make my own....
Click to expand...

Or buy one from me
 
You must log in or register to reply here.
Back
Top