great white
Well-Known Member
hmmm, good point......
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
PMD (Pump Mounted Driver) Issue Must Read
- Thread starter nvrescue
- Start date
hmmm, good point......
JMJNet
Recruit
That was what I was thinking too. What is $500 for a Heath kit if they can buy >$100k truck? It is like 0.5 cents to the dollar.
Acesneights1
New Member
Borrowed from Matt the Brat...PLease return.
Attachments
Acesneights1
New Member
If anybody should get sued it should be the shitty Chinese tire manufactures. I had a brand new one blow in less than 100 miles.
saratoga
Unpaid Help
He can threaten to sue me when he's not pressure washing sidewalks.
HighSierra86
Active Member
Im glad to see we were all thinking the same thing.
Ah well I needed a good laugh today anyways ):h
bison
Well-Known Member
I think you're barking up the wrong tree Ace.No body says you have to buy them.
I bought a set of 4 New chinese 16 ply tires for my wheel loader for $600 a piece.Best tires i ever bought.:thumbsup:
Amercan made ones where 3 times that for just 12 ply a piece.
buddy
Active Member
I like buying Chinese stuff made in Mexico
Detroit Dan
New Member
with tech support from India
- Staff
- #50
Sold from a store in Dearborne, MI and shipped via Quebec to Vancouver.
Acesneights1
New Member
I think you're barking up the wrong tree Ace.No body says you have to buy them.
I bought a set of 4 New chinese 16 ply tires for my wheel loader for $600 a piece.Best tires i ever bought.:thumbsup:
Amercan made ones where 3 times that for just 12 ply a piece.
Stop by the RV section and look at the chinese made shit tire that blew on my camper with less than 100 miles on it. They are all coming off and going in the trash.
http://www.thetruckstop.us/forum/showpost.php?p=287332&postcount=8
I hope a Tsunami wipes China off the map.
great white
Well-Known Member
Acesneights1
New Member
No. The poison our kids as well with unsafe food and toys. They should all die.
bison
Well-Known Member
OK Ace,why not give credit where credit is due.
Dont blame China,blame the US company's and importers that have these tires made there.They provide the specs,they are responsable to make sure the stuff is up to par. China makes whatever these people want.
You want good stuff,China will produce it.You want bad,they'll produce that too.
Where do you think the D-tech is produced,and all the other electrical we use on our trucks ?? US? I....dont think so!
buddy
Active Member
Do you feel strongly about this Kenny? I wouldn't be that harsh, they are a proud people really. It is our coroporate greed and their corrupt Government that causes the issues. I have been there, and had a great time. We take for granted many things they do without and they are happy. You can find that in this country too, but in general we have a higher standard of living. And you cannot imagine all the cameras and microphones all over the place spying on you, and soldiers on the street at all hours. I was in no way hindered, but it was just strange.
Acesneights1
New Member
Which is why they fail.
It wasn't American companies that told them to put antifreeze in baby formula. It wasn't american companies that told them to put lead paint in toys. Just remember when your kids are sick and your out of work and your farm is gone(cause they are trying to undercut that too) That you liked them so much. Make no mistake, they hate us and will do us harm. it's all about them.
Missy Good Wench
Wild Blonde from Cloud Mt
Hmmmmm
A law suit against GM has now escalated a tad ??????????/
I use the DTECH PMD's and have not had one issue.
OH BTW
This promoter of the PMD suit was over across town at the page this morning and had posted this crap there too.
I was the first to respond.
OH YEAH BUDDY,I had plenty to say.
I could have just deleted his posting (Mod) but the troops really need to chew on this as they have done here.
The failure of things is that WE THE PEOPLE have allowed our government to have such BS as the EPA and to perpetrate all the lies on the American people.
Once the $$$$ stop flowing due to the high cost to produce things here, naturally the companies will go where they can make a profit.
The Dodge Cummins is made (or at least in part) in China (got this from a Cummins senior rep)
If this fool with his CIVY H1 really wants to fix the thing, Buy a well setup DB2 Ip and bolt on the thing and then go have a hot dog and a beer.
GEEEEEEEEEEEZ what a waste of time to stir this POT (PMD thing) its a dead horse.
Buy a DTECH and a cooler and forget about it.
To date the local shops here have seen ZERO failure with the DTECH that is mounted in a cool place.
Why not sue the EPA for creating the emissions regs in the first place. Had this not happened, GM, Stanadyne and AMG would not have used the DS4 in the first place.
Simply because the DB2 was pretty much BOMB proof ):h
Sort of an accessory "Before the fact"
Now maybe this clown could do better by ranting and suing over the extreme dangers that the government madated ABS system place on us and our loved ones.
GEEEEEEEEE we could sue, GM, Ford, Chrysler, and all the overseas builders too.
Now this is a real safety concern. Never had a PMD cause my car to be unable to stop, sure can't say that about the ABS junk.
Many times the ABS kicks in and the rig is almost impossible to stop, especially on snow or slippery stuff.
Oh yess, now they have an automatic parallel parking device. Just wait until one of these POS's tries to park the car at 70 MPH
Missy sits shaking her head in absolute wonderment of the fools that crawl in umder the door.
Missy
A law suit against GM has now escalated a tad ??????????/
I use the DTECH PMD's and have not had one issue.
OH BTW
This promoter of the PMD suit was over across town at the page this morning and had posted this crap there too.
I was the first to respond.
OH YEAH BUDDY,I had plenty to say.
I could have just deleted his posting (Mod) but the troops really need to chew on this as they have done here.
The failure of things is that WE THE PEOPLE have allowed our government to have such BS as the EPA and to perpetrate all the lies on the American people.
Once the $$$$ stop flowing due to the high cost to produce things here, naturally the companies will go where they can make a profit.
The Dodge Cummins is made (or at least in part) in China (got this from a Cummins senior rep)
If this fool with his CIVY H1 really wants to fix the thing, Buy a well setup DB2 Ip and bolt on the thing and then go have a hot dog and a beer.
GEEEEEEEEEEEZ what a waste of time to stir this POT (PMD thing) its a dead horse.
Buy a DTECH and a cooler and forget about it.
To date the local shops here have seen ZERO failure with the DTECH that is mounted in a cool place.
Why not sue the EPA for creating the emissions regs in the first place. Had this not happened, GM, Stanadyne and AMG would not have used the DS4 in the first place.
Simply because the DB2 was pretty much BOMB proof ):h
Sort of an accessory "Before the fact"
Now maybe this clown could do better by ranting and suing over the extreme dangers that the government madated ABS system place on us and our loved ones.
GEEEEEEEEE we could sue, GM, Ford, Chrysler, and all the overseas builders too.
Now this is a real safety concern. Never had a PMD cause my car to be unable to stop, sure can't say that about the ABS junk.
Many times the ABS kicks in and the rig is almost impossible to stop, especially on snow or slippery stuff.
Oh yess, now they have an automatic parallel parking device. Just wait until one of these POS's tries to park the car at 70 MPH
Missy sits shaking her head in absolute wonderment of the fools that crawl in umder the door.
Missy
Acesneights1
New Member
You aint kidding. I disconnect the ABS even if it IS working. The town truck I drove has it and it was scary at times. BY the same logic everyone should sue Dodge for the VP44. But in realty a LP upgrade fixes the problem.
Detroit Dan
New Member
I live in rust country and generally own old GM trucks. I've seen lots of problems with brake lines rusting out and failing at inopportune moments. They knew when they built these trucks that steel brakelines would corrode and eventually fail. So can I sue even though I haven't had an accident related to this?
To date, I haven't had a saddle tank explode either, probably because I haven't allowed a crooked journalism tv show to put an incendiary device in the tank.
Better start learning Chinese now, the way your government is borrowing money from them we will all belong to them someday. Chinese is surpassing Japan with their Imperialist world domination. Which is fueled by their overcrowding.
To date, I haven't had a saddle tank explode either, probably because I haven't allowed a crooked journalism tv show to put an incendiary device in the tank.
Better start learning Chinese now, the way your government is borrowing money from them we will all belong to them someday. Chinese is surpassing Japan with their Imperialist world domination. Which is fueled by their overcrowding.
Detroit Dan
New Member
my abs has been disconnected since shortly after I got my truck. One side sensor failed and made the truck terrible to drive. Repaired it once, it went again so I was done with it. It would grind everytime I came to a stop, plus it felt like the brakes were releasing just before you came to a complete stop. I've done fine without it.