zeppelingto
New Member
Just got a 1999 3500 and can't get it to start. I've replaced the PMD(haven't mounted it but its connected, I don't need to mount it until it runs right?), fuel filter, and air filter. I splashed a little Ctene booster in the fuel filter holder. Cranks and sounds like its about to start, but nothing. I really don't know much about the history of this truck.
Looked and listened to the lift pump and it is running just sounds a little rough my Suburban 6.5 wasn't nearly as loud. I opened the fuel filter and it pours fuel out of it when the pump is running. Is there a way to check the injector pump? Could it be the optical sensor?
Under the truck there looks like a lot of oil/grime splashed all over. I don't know if this thing has a bad head gasket, but oil seems normal no oil in the antifreeze and just a little oil drops on the garage floor.
Would grounds be an issue if the truck is turning over? Also, the glow plugs click on and off a couple cycles sometimes...
Looked and listened to the lift pump and it is running just sounds a little rough my Suburban 6.5 wasn't nearly as loud. I opened the fuel filter and it pours fuel out of it when the pump is running. Is there a way to check the injector pump? Could it be the optical sensor?
Under the truck there looks like a lot of oil/grime splashed all over. I don't know if this thing has a bad head gasket, but oil seems normal no oil in the antifreeze and just a little oil drops on the garage floor.
Would grounds be an issue if the truck is turning over? Also, the glow plugs click on and off a couple cycles sometimes...