Search results

Two good batteries seems to have been the missing part to my puzzle. Seems strange that it would crank over but the glows wouldn't work Sent from my SM-G930V using Tapatalk

What's strange is that there is no power to the fuse at all but the fuse is good Sent from my SM-G930V using Tapatalk

The batteries are not very good i will try a different set out of my truck. I didn't use a meter but test light shows voltage at controler Sent from my SM-G930V using Tapatalk

I do but This is obd1. I did flash the codes and had a code for gp circuit relay fault and that is why i changed it Sent from my SM-G930V using Tapatalk

The fuse is good and they are Napa parts. All other fuses are good Sent from my SM-G930V using Tapatalk

Im working on a 95 for a friend that the gp dont cycle as they should. I checked all the gp and replaced 2 that where question able. Replaced coolant temp sensor in crossover, and replaced gp relay, and they still dont work. All grounds seem tight going to try and clean a couple up better. Im...

Thanks I'll check that first I know both of the rear ones went bad and I replaced them didnt know you could clean them Sent from my SM-G900V using Tapatalk

Our suburban is having some issues it started very intermittent but has gotten worse lately. It has the digital dual zone climate control and sometimes the driver side will blow hot and the passenger will be cold with both set on 60. Today both are blowing hot with it set on 60. I'm thinking...

Where did you get the sensor and I'm guess you sourced the mirror from junk yard Sent from my SM-G900V using Tapatalk

Do any of you guys run lighter oil in the cold months of the year? never have but need to change oil and was wondering about it

Well its been a while since I updated you guys on the project but I got the floor poured back on Halloween and was out of town the next weekend but this last weekend I got the sheeting all replaced and the windows that Im not going to have sheeted over, I found a used 8x18 garage door on...

I never did anything with this proiject as my current garage project has been occupying my time, but at some point I will get back to it

I have rubber expasion joint to go between the wall and floor

Sorry haven't been able to post for a while but last Saturday we got the building moved in and set on the walls and anchored down. wasn't able to get much done this weekend due to my daughters first birthday party, but did get the dirt work done and the sub grade set. need to get a few more...

Well I'm using wedge anchors because I thought trying to set the building down onto bolts would be way too difficult

Well after another busy week and weekend I have footings and block walls. Unfortunately I have hit my "goal" budget already, let's be honest It was a dream really, but unless something completely unexpected happens I'll be within my max budget all that is left is to pour floor and but garage...

Well the weekend was eventful and successfull got the old garage emptied Thursday and lifted and on trailer Friday night. Headed outta town at 645am, trip went almost perfect until the rear beam snapped and back of building fell, we where about 2 miles from destination. Luckily we had the...

I'm still going to have a wood burner but would use the floor heat to keep it around 40 and then light a fire when I want to be working on something

I have been thinking about doing the floor heat, at least running the piping and doing the rest as budget allows iv always wanted it and like you say now is the time to do it. Iv been told the most expensive part is the insulation under it