Where Did I Take This Off From ? ? ? ? 😹

[MrMarty51]

I remember removing this bracket but now I can not rememer just what position it came from.
I tried a search using the part number and I can find pictures of it, and also of an entire PS mounting bracket but no explanation of whence this unit belongs.
It does have a slight rub mar on the tab that hangs out 90* but I cant find, or, remember just which bolt location it came off of.
I was thinking it was fairly low on the PS pump side.

 

[dbrannon79]

when I searched the part number I found this image. not sure if this shows this piece but I'm wondering if it's part of the bracket directly behind the pump maybe something to do with the slot in that part?

 

[dbrannon79]

Oh wait a minute. another site shows it as a bracket on the brake booster!

 

[Glagulator]

It bolts to the P/S pump to support the pressure hose with EVO equipped trucks.

 

[MrMarty51]

Oh wait a minute. another site shows it as a bracket on the brake booster!

Look at the 90* tab. There is a slight mar in about the middle of it.
I remember removing the bracket and thinking, this thing goes right here, then it was gone, My mind that is.

 

[dbrannon79]

What Glagulator said makes better sense. that mar is where the the pressure hose was being supported.

 

[MrMarty51]

It bolts to the P/S pump to support the pressure hose with EVO equipped trucks.

Okay. I’m going to be eliminating that various orifice thing, i suppose though that this still will be needed to support the hose.
Thats why that piece of it has a slight arch and a rub spot.

 

[MrMarty51]

It bolts to the P/S pump to support the pressure hose with EVO equipped trucks.

Thank You very much. That is most helpful.

What Glagulator said makes better sense. that mar is where the the pressure hose was being supported.

Yup, why that 90* tab has an arch innit too.

 

[Glagulator]

 

[MrMarty51]

View attachment 90720

Oh boy. I cant thank You enough for going to the trouble of crawling under Your truck and snapping a shot of that bracket.
What a relief it is.
And I dont even need the plop plop fizz fizz.

 

[Glagulator]

Found that photo on the web, thanks anyway.

 

[MrMarty51]

Found that photo on the web, thanks anyway.

You could have come off with quite a line on that one.
Maybe something like:
Yeah, twelve degrees below zero and snow four foot deep, had to use about two hours to shovel the snow away, then on with the Car Hart Arctic extreme bibs and coat to crawl under there and got a ton of snow falling on My face and blah blah blah blah.
But regardless, i do thank You.

 

[jrsavoie]

Found that photo on the web, thanks anyway.

Sounds easy. Finding that on the web would only take me 2 or 3 weeks.

Getting it from where I found it, to here might be decades

 

[MrMarty51]

Sounds easy. Finding that on the web would only take me 2 or 3 weeks.

Getting it from where I found it, to here might be decades

I did at least a half A dozen searches and could not find a decent pic of where it belonged.
I used the PN and still could not find it. Just PS mounting brackets in general.