My low beam lights went out in my truck the high beams still work and all running lights work I checked all fuses and are fine and I took the relay for high beams and switched with low beam and still stayed the same what else could it be the switch itself? And if so is there a way to check it to make sure?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
lights
- Thread starter kyle675
- Start date
1995 chevy c2500 3.5 turbo diesel
JayTheCPA
Well-Known Member
Buddy of mine just went though this.
In his case it was the engine bay relay connection (the one adjacent the firewall and brake system). Poked around with the wires coming 'up' to the relay and found one of the connections was lose as the low beams then would pulse as he played with one of the wires. Pushed all of the wires 'up', made sure the relay had good connections, and now his low beams are back to life.
In his case it was the engine bay relay connection (the one adjacent the firewall and brake system). Poked around with the wires coming 'up' to the relay and found one of the connections was lose as the low beams then would pulse as he played with one of the wires. Pushed all of the wires 'up', made sure the relay had good connections, and now his low beams are back to life.
JayTheCPA
Well-Known Member
Yes it is the 6.5 I actually just bought the truck and still getting used to it its my first diesel and first chevyOut of curiosity, is that a *6*.5 diesel?
And by the way, Welcome to TTS!