cucv needs a flatbed

[Brooklyn Tow]

It's Gonna be a Brick Sh!t House.....Nice work!

 

[davo727]

isn't red the permanent stuff?

It will come apart, not real easily but doable. I just dont want anything to rattle apart.

 

[davo727]

Thanks dude!

Also in that last pic you can see that I ditched the vacuum pump and replaced it with a oil pump drive unit from a 92 6.5. With the Turbo400 gone there is no need for vacuum.

It's Gonna be a Brick Sh!t House.....Nice work!

 

[davo727]

got a little more done- front shaft for mockup only

I need to shorten the front shaft 4 inches or so, had to clearance my crossmember mount a little to clear the double u joint

I will replace all 3 front u joints when I shorten the shaft

 

[davo727]

another pic I hope

 

[tanman_2006]

What welding set up are you using? If you don't mind me asking.

 

[davo727]

The frame plates I used a miller syncrowave 250 tig with a thumb control. The crossmember mounts I used a millermatic200 mig. My welding is ok, good enough for an old truck but I dont claim anything else