Cab Lights

[tomrex]

ooohh, that's no fun! My own harness it is. a couple hundred zip ties, some connectors, and a bunch of wire I'm assuming. Ech. Sounds like a nice weekend project.

 

[busdriver75]

ooohh, that's no fun! My own harness it is. a couple hundred zip ties, some connectors, and a bunch of wire I'm assuming. Ech. Sounds like a nice weekend project.

don't forget the beer!!:cheers2:

 

[HDpullingpower]

that sounds like a plan. a little clear silicone under each light and i bet it'd be good to go

Exactly what I did.:thumbsup:

we're in the same boat tom! i'm going to just order the OEM NBS lights from either the dealer or gm parts direct. i'm going to do as most others have and make my own harness. somebody said a while back the OEM harness runs like $220.

I bought the harness from the dealer, it was like a 110.00.:thumbsup:

don't forget the beer!!:cheers2:

Yup...helps with the nerves....Good luck guys:cheers2:

 

[Cheyenne19]

That seems really high for the harness. I might hold off on doing this.

 

[ROCKYMTN]

That seems really high for the harness. I might hold off on doing this.

My harness cost me about $.05

 

[busdriver75]

My harness cost me about $.05

what kind of connectors did it take to hook your homemade harness into the actual lights?