Search results

All this social media makes it hard to keep track of the same person. WW, I don't blame you for not doing FB. I swore I never would, but career change forced it upon me.

I think that's the only thing WW, Leroy and I were talking and I told him to take it off the list. Don, you should see that set on Mon. or Tue. and I have a track # if it doesn't show.

Nope.

Thanks Will, I see the valve cover coming off shortly. It leaks, but not enough to warrant removal till now. I still need to do flexplate exhaust inspection, but no time. Being a 50 year old college student takes all my time. My 07 colorado has evap leak that needs smoking out with my halloween...

Thank you WW. I know new parts mean nothing in todays age.

I'll inspect the flexplate. The starter is new and shields have been checked, will revisit downpipe and maybe crossover gaskets. That rattle comes back at highway speed with no load and then there is a popping noise that is random. The exhaust is not old and will check exhaust manifold studs. At...

Update, I took the belt off and noise remains at 950 rpm and goes away at 1k. I inspected the rubber around the HB and and belt pulley. With carcode I shut each injector off and it ran too rough to rev it up. When turning them on I got clatter each time. I don't know how to get carcode to hold...

I haven't had time to spend any it. Tomorrow I will huck carcode on there to hold it at the Rpm the noise kicks in and determine where the issue is. I'm gonna check the balancer rubber first. Either way your'e gonna get an order for roller rockers, injectors or dampner

The other day while driving home from Boston I heard a different noise coming from the engine bay. I got up the next day and the truck would not start. It needed a starter and is unrelated. At idle, there is no audible difference. Between 900 and 1kRPm there is a clatter and it goes away shortly...

Don, PM me an address and I'll get the timing set out by weeks end. Like WW said, change it out while your'e there

I used a IR temp gun for readings, just cause I had one.

That was a 30 dollar mod that I couldn't justify not doing. Now that air to water intercooler is gonna hurt.

Thank you WW.

You best shot of getting the old one out without breaking is to gently use heat on the housing. Around 230 will soften the red thread sealant if I recall and if its gonna come loose it will. The corrosion is another issue.

I'm on Rockauto and looking at new starters. My choices are Remy Gold or AC Delco Professional. The money is about 15 bucks difference. Is one as good or better than the other. I don't do rebuildsand this is either gonna be a spare or installed. I have an electrical issue with present starter...

I used it around my accumulator and anywhere needed on my AC system. I used aluminum duct tape to hold it in place.

NPT threads and the barbed fitting is available at HD or Lowes.

Update 7/26. I installed this Mod quite some time ago, and figured I would post my findings. My truck won't start , so I am cleaning battery terminals and starter terminals. I had the air cleaner housing off and there was no oil at all where you usually see it. The catch can maybe has a half a...

The was one, Leroy used to send out LED reverse light conversion disks with orders.

Subscribed. Thanks for finding yet another way for my truck to empty my wallet. I like this idea a lot.