Search results

I'd like one of those. Do you think it would get 4 mpg?

If it's similar to the porta potty paper, can you still get the same results with 40 grit sand paper?

Has there been any testing of the bypass filters?

My Kubota does, but it's harder to feel for than other machines I've run

The lever controller for the front bucket should also have a float position

I most often changed my fuel filter with the oil. I ran only full synthetic engine oil. I also ran a bypass filter and changed the oil between 10 & 20,000 miles. The filters listed previously are good. I also liked Amsoil, Baldwin & Mobile1 filters. I used the FS2500 and Amsoil bypass...

If you get the areas where the tires run set to slope. You can set the box and not worry about adjusting it.

I'm wondering if engine Restorer actually raises the compression any. I've always thought I noticed engines with higher compression/ engines run.on full synthetic engine oil, starting and stopping faster...

You're doing better with your ribs than I did with mine. For 2 weeks I never did anything. The ribs had just stopped clunking when I moved.My wife said, "The least you can do is mow." After 4 hours of mowing, I was back to clunking and started the healing process over. When I originally...

Very nice. Anxious to see how it progresses

After I saw the planter Idea. I was interested in doing it at our house. It doesn't look like we're even going to get much of a garden in this year. But I'm on light duty for the next couple of months. These exceed my eight restrictions and the backhoe isn't going to be running until...

Greenhouse frame? I saw 10 and 12" concrete drainage tile advertised on marketplace for planters./ raised bed They actually didn't look to shabby. I have some 18" or so diameter that I may try selling or giving away. A lit of times I can't give things away. Nobody wants my junk. But they're...

I would look for a running, used vehicle. I don't know if these are still coming up on government actions or vehicle auctions or not. Do you have any car dealer or rebuilder friends that go to the auctions? Deals can be had. I had a few State of Illinois trucks, I sold to a friend. He...

I haven't looked at changing lines on a vehicle with the cooler in the radiator. It seems to me if he got the complete kit with the cooler, he should be able to install the kit. He probably would need the line holder brackets. I've used one hole clamps for that.

Welcome. What engine does that bad boy have in it?

Definitely do the jar test. I usually run at least 1/2 gallon into a gallon pickle jar. Leave it sit at least 20 minutes. What's on the tank side of the Fass? Any type of screen or filter?

X2 on Banks videos

Worm casings are great. For a couple years in a row. Maybe still. Farm & Fleet had some 13 13 13 heat turned out to be worm.casings. It stunk and didn't spread well. It wouldn't run.through a light duty spreader. But it sure seemed to do the job

There are short adapters/carbs that screw into each side of the factory lift pump. They're usually available in the help section of any parts store. I ordrr them off Amazon. We've been using empty 55 gallon motor oil drums to fill and collect diesel. I'm not at all worried about any residue...

Do you have a link to the made in the USA stuff?