How do you all get 6.2s to 300K miles

[MrMarty51]

Here is a better picture.

GM Female Crimp Terminals Choose 10-12 awg, 14-16 awg, 18-20 awg

Available here are individual Delphi Packard 56 and 59 Series Female crimp terminal connectors available in several different American wire gauge sizes. (AWG) For the male terminals please click HERE Please use drop down menus above to choose your wire gauge size needed. There are many, many...

jcaparts.com

There also is the male side to these terminals if ever You would have such a need.
The male and female insulators are also available.

 

[nycxjeremyy]

Waa going to get this set plus the crimp tool btw

Terminal and Connector Set, 150-Piece

Amazing deals on this 150Pc Terminal And Connector Set at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

 

[dbrannon79]

Harbor freight's connector terminals are junk, tools are good but the terminals aren't. I would venture around for some quality terminals from Napa like Marty mentioned, or if you want the universal ones, Home depot has some good ones that are also insulated.

https://www.homedepot.com/p/Gardner-Bender-1-4-in-Fully-Insulated-Wire-Disconnects-in-Blue-15-Pack-15-153F/202521914

 

[MrMarty51]

Waa going to get this set plus the crimp tool btw

Terminal and Connector Set, 150-Piece

Amazing deals on this 150Pc Terminal And Connector Set at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

The only way I use that type of terminal is to grip the metalic part of the terminal with pliers, then another set of pliers and pull off that insulator.
Then I have a crimp tool that has a sort of a punch on it.
With that tool I cave against the wire right where the seam is on the terminal, then cave the other half of the seam down against the first cave in. The terminal is then soldered to the wire.
When I get out to the garage I’ll pic the process.

 

[MrMarty51]

But yeah, do not attempt to fix that connector with those run of the mill terminals.
Used to be a saying i aint heeerd inna very long while.
Keep Your GM vehicle all GM.
Our old units such as these cant help but aftermarket many items but as much of my truck ss possible gets GM equipment.

 

[MrMarty51]

These are a pair of the automatic stripping tool. The point and the U is where I do all My crimping.



Locked in for the first smash over and it is smashed down.


Second smash over and it now is ready to solder.


If insulation is desired, slide a piece of heat shrink over the wire before crimping/soldering the terminal to the wire.

 

[nycxjeremyy]

Replaced the crimp, I dont understand

New video · Tuesday, Feb 3 ð¬

Tap to view!

photos.app.goo.gl