jrsavoie
Recruit
What's the best standing seam steel for my money?
Near Gilman, Illinois
I have done some hidden fastener standing seam roofs years ago. I did some hook and roll, some that snapped together and one batten cap job - Never again on the batten caps.
I have not been around this type of work in a while.
I was told I needed sealant in the groove for below 3/12 pitch applications.
This was encountered years ago and we had to hand caulk every seam. I was told there are products out now with sealant installed in the groove at the factory.
Looking at a 2 part job. 1st part is just a porch roof - between 2 and 3/12 pitch. We can probably make it at least 3/12. About 20' wide. Sheets will be about 14' 4" long.
The 2nd part on the same house will be 12/12 roof. She wants something dark. I have not seen what she is looking at yet. Not that color has anything to do with product selection
Near Gilman, Illinois
I have done some hidden fastener standing seam roofs years ago. I did some hook and roll, some that snapped together and one batten cap job - Never again on the batten caps.
I have not been around this type of work in a while.
I was told I needed sealant in the groove for below 3/12 pitch applications.
This was encountered years ago and we had to hand caulk every seam. I was told there are products out now with sealant installed in the groove at the factory.
Looking at a 2 part job. 1st part is just a porch roof - between 2 and 3/12 pitch. We can probably make it at least 3/12. About 20' wide. Sheets will be about 14' 4" long.
The 2nd part on the same house will be 12/12 roof. She wants something dark. I have not seen what she is looking at yet. Not that color has anything to do with product selection