Will
Boobies make me happy
The g/f got me these for my BDay.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
What do we have here?
- Thread starter Will
- Start date
Will
Boobies make me happy
And this is what I got myself.
tracker954x4
New Member
- Messages
- 1,534
- Reaction score
- 0
Sweet!:beer:
Will
Boobies make me happy
Here it is in all it's glory. I'm not sure of the exact Precision name but it is suppose to be comparable to a 1058 from Suncoast. I didn't realize how damn heavy these things were. This is the second one to get sent out. The first one got wet and the box destroyed with no label on it. So here was a TC sitting in a UPS warehouse and no one knew anything about it. Way to go UPS
I'll be heading over to Illinois Sunday to meet up with a couple members from DP that have experience doing this and the MA Pump rub. The camera will be getting fresh batteries to document the process. I'm looking forward to Sunday. Got to give a big Thanks to Mike L. at Inglewood Transmission. Been a big help answering my questions and getting this new one here quick.
I'll be heading over to Illinois Sunday to meet up with a couple members from DP that have experience doing this and the MA Pump rub. The camera will be getting fresh batteries to document the process. I'm looking forward to Sunday. Got to give a big Thanks to Mike L. at Inglewood Transmission. Been a big help answering my questions and getting this new one here quick.
- Staff
- #6
Here it is in all it's glory. I'm not sure of the exact Precision name but it is suppose to be comparable to a 1058 from Suncoast. I didn't realize how damn heavy these things were. This is the second one to get sent out. The first one got wet and the box destroyed with no label on it. So here was a TC sitting in a UPS warehouse and no one knew anything about it. Way to go UPS
I'll be heading over to Illinois Sunday to meet up with a couple members from DP that have experience doing this and the MA Pump rub. The camera will be getting fresh batteries to document the process. I'm looking forward to Sunday. Got to give a big Thanks to Mike L. at Inglewood Transmission. Been a big help answering my questions and getting this new one here quick.
Congrats on getting everything!
The picture will be awesome, can't wait to see them. Good luck with the build and everything!
Will
Boobies make me happy
Got pics up of the build in my garage. I'll update this when I get a chance.
durallymax
Active Member
- Messages
- 1,929
- Reaction score
- 2
they definately arent light. However Suncoast labels their converters as 73lbs but they weigh 61lbs fully packaged.
durallymax
Active Member
- Messages
- 1,929
- Reaction score
- 2
so after watching them do it, do you believe me when i say its really not that hard to do??
Will
Boobies make me happy
Yeah. It wasn't as bad as what I thought it would be.I glad though I had some one with experiance do it. Plus I met up with a couple members off of DP which was cool. Everything went pretty smoothly except for 2 things. 1 was we found one of the bolt holes cracked when we removed the bell housing. They must have over tightened it at the factory. In this pic here you can see where it was cracked.
Fortunutly we did this in a metal fab shop and one of the guys helping is an awesome tig welder and was able to weld it back on. We then retapped the hole so the bolt go in smoothly. He also fabbed up a transfer case brace similar to Suncoasts brace, so I put that on as well. Second issues was with the boost modifier valve that was sent. With 04 being a transition year, some changes where made to the trans as well. When I ordered my kit, no one mentioned or asked me which one I needed. All I would of had to do was pull the PTO cover off and look to see if there was a gear or not in there. We ended up using the stock one for the time being.
All in all I'm pretty happy. When I get on it I can really tell when the T/C locks. I'm running my Pred on 100H.P level now and can break the tires loose easly. Really want EFILive with a DSP5 switch though.
Fortunutly we did this in a metal fab shop and one of the guys helping is an awesome tig welder and was able to weld it back on. We then retapped the hole so the bolt go in smoothly. He also fabbed up a transfer case brace similar to Suncoasts brace, so I put that on as well. Second issues was with the boost modifier valve that was sent. With 04 being a transition year, some changes where made to the trans as well. When I ordered my kit, no one mentioned or asked me which one I needed. All I would of had to do was pull the PTO cover off and look to see if there was a gear or not in there. We ended up using the stock one for the time being.
All in all I'm pretty happy. When I get on it I can really tell when the T/C locks. I'm running my Pred on 100H.P level now and can break the tires loose easly. Really want EFILive with a DSP5 switch though.
RodZZilla
I8TOKYO
Cool. Are they GM or aftermarket mirrors? I can't wait to get my tranny done.
Will
Boobies make me happy
Had a set of Cooper Discover ST/Ts put on my Summer rims the other day. Also installed a set of tie rod sleeves that I built using Yaz's drawing.
Tie rod sleeves
Tie rod sleeves
BIGR
Lucky To Be Here
Nice tires and wheels. How loud are those tires at highway speeds?
tracker954x4
New Member
- Messages
- 1,534
- Reaction score
- 0
Nice!:beer: Sweet tires.
What did you use to make the sleeves out of?
What did you use to make the sleeves out of?
Will
Boobies make me happy
I made it from some turn ground and polished cold rolled stock that we had laying around at work.