Dan Hunter
Truck Terrorist
Fixed! BOTH nuts on the upper right A-arm were loose. Stops straight now.
Sent from my SGH-M919 using Tapatalk
Sent from my SGH-M919 using Tapatalk
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Weird handling while braking
- Thread starter Dan Hunter
- Start date
btfarm
America First!
Good to hear it Danm:thumbsup:
Sent from my SCH-I535
Sent from my SCH-I535
btfarm
America First!
NVW
Well-Known Member
My 3500 would dive for the ditch while braking and turning at the same time, it was the steering damper.
Will L.
Well-Known Member
Good to hear you got it! Could have been a bad day if they came out.
tanman_2006
Just a farm kid...
Not something I would ever think of happening but good catch! Glad its back to working properly
Had an alignment shop leave the caster/camber bolts not tight enough on a past ride. It showed up months later with much entertainment/excitement when they came loose. I suggest you get it realigned if that wasn't part of the fix.
Also don't forget brakes include the rear brake system as that can cause a pull as well.
NVW
Well-Known Member
I missed the part where it was fixed, glad you found it Dan.