Suburban E Brake Cable Bracket Mount Picture

[nobby]

Hi,
Can somebody do me a favour and snap a picture of the bracket/cables located on the driver side forward rear spring mount on a late 90's Suburban. The E brake cables pass through and mount to this. I reconfigured this to a different cable setup for my rear disc conversion and am making changes again that require going back to the original cable set up. I know that given five minutes and scratching my head ill figure it out but an easily taken picture is worth a thousand words and all that.

Cheers
Nobby

 

[Wreckinball67]

I have a 1998 K1500 (6.5 diesel), hope this helps.

 

[Twisted Steel Performance]

@Wreckinball67 that's a mighty clean underside ya have there...

 

[Wreckinball67]

You ought to see the topside! Fresh GEP engine. Truck has 93k, original engine got a crack in the #8 cylinder.

 

[nobby]

@Wreckinball67 Thanks for that, slightly different to the burb but i get the jist. That is indeed a clean truck!

What brake set up are you running back there?

Cheers
Nobby

 

[ak diesel driver]

Never seen a 6.5 with a MAF before. I'd heard there were some out there though

 

[Wreckinball67]

Stainless Steel Brake Corporation (SSBC) rear disc brake conversion.
To ak, yeah it's kinda of anemic in stock form, I have all the parts to make it into a "F" VIN setup just haven't got to it yet.

 

[ak diesel driver]

Ah so you have an EGR too.

 

[Big T]

I have a 1998 K1500 (6.5 diesel), hope this helps.View attachment 62065View attachment 62066

Just reminding me that I still need to swap in the 14 bolt Full Floater from a GMT 800 with rear disc brakes to my son’s 1994 Suburban. This after replacing the injection pump, which was halted by Covid work from home. After replacing the stamped steel lower control arms with forged lower control arms. After replacing the cracked CB boots.

 

[Wreckinball67]

Ah so you have an EGR too.

Yes, EGR, MAF & CAT.

 

[nobby]

@Wreckinball67 interesting I did not think they were making a kit for the 14 bolt rears.

 

[Wreckinball67]

They don't. I have a 91/2" semi-float rear end.

 

[nobby]

Yeah, but I did not see a kit offered for the 14 bolt semi back when I did my conversion. Cannot find it on their website now either unless I'm going blind or something!

No matter I'm married to the TSM kit now anyways.

 

[Husker6.5]

They don't. I have a 91/2" semi-float rear end.

The "baby" 14 bolt (8 lug pattern) used only on C/K1500 P/Us and Burbs.

 

[Wreckinball67]

You are correct, I just ordered kit for the k1500 (which is what mine is) and slightly modified the brackets for the larger axle tubes.

 

[Wreckinball67]

Oh, and mine is a 6 lug.

 

[Husker6.5]

Doh! That's right.

 

[nobby]

Forehead palm slap, I keep forgetting that the pickups had the 6 lug option in the lighter duty.

Cheers
Nobby