Square body owners needed

[Twisted Steel Performance]

I have a project I'm working on and I need square body owners that would be willing to measure the overall length of your steering shaft from end to end installed.



PM me please... or post lengths and year of truck here...

 

[ak diesel driver]

I have an 80s suburban that work?

 

[ak diesel driver]

Correction it's a 70s

 

[Rockabillyrat]

I can measure my 78 next time I'm out in the garage.

 

[Twisted Steel Performance]

Yes to both...

I'm building steering shafts and want correct measurements for them...

also, have a look at both connections, I know 79 up are the same connection as the 90's trucks are but not sure the length is the same...

 

[Twisted Steel Performance]

My 86 burb measures 21" so it's the same as 93 trucks...

 

[ak diesel driver]

Sorry my steering column is gone and it looks like the upper part where it attaches to the column has been hacked

 

[EWC]

I've got a couple here . Do you want from where the rag joint bolts on to the end of the upper link ?

 

[J.Peart]

I can get a measurement off my 84 later.

 

[Twisted Steel Performance]

I've got a couple here . Do you want from where the rag joint bolts on to the end of the upper link ?

From end to end, where it connects to the steering box to end of column connection...

 

[J.Peart]

Sorry for the delay. I get about 20-1/4" on my 84 k30 not including the rag joint itself. This doesn't account for play in the slip joint though.

Hope this helps

 

[Twisted Steel Performance]

Thanks everyone, I now have new shafts listed on my site ready to ship...