seeking for a part #

[matuva]

I'm looking for the part number of an oil switch fitting which was used on 1994-1994 setups, before GM decide to put the oil pressure switch under the intake manifold - why make things easy as we can do them more complicated? - :rolleyes5:

It's part #6 on the diagram.



It bolts on the rear left of the engine.

Any?

 

[Twisted Steel Performance]

All it is is a fancy 90* fitting, you could have a short hose made up to move it to a bolt on the intake...

 

[bison]

These fittings are inverted angle, not to be found any were.
Matuva do as trailrider suggest,..get a short 1/8" grease hose and pull the OPS out of hiding but if you insists on staying stock i have couple of these fittings in the useless parts bin waiting for that unlikely special occasion someone may need it.

 

[625fireman]

I've got a couple of them. I can send you one if you want it. Just pay postage.

 

[Will L.]

Any pics Bison or 625? Just curious of inverted fitting.

 

[bison]

Here is pics

The 45 degree angle is from a 6.2(1/4" male x 1/8" female pipe,..the inverted angle is 6.5 (1/4" x 1/4" pipe)

 

[Will L.]

oh yeah! now I remember those two! pita!