Will L.
Well-Known Member
Would be interesting to make an adapter plate for the output side with hose attached, drop the screen into a bucket of oil and run it with a cordless drill.
Measure the actual flow of the 3 different pumps.
Then could rig in a pressure gauge and do that too.
Using a small cordless drill- we couldn’t really see the exact difference in power, but if it is any notable difference- the tiny motor should show up any major difference easily.
Measure the actual flow of the 3 different pumps.
Then could rig in a pressure gauge and do that too.
Using a small cordless drill- we couldn’t really see the exact difference in power, but if it is any notable difference- the tiny motor should show up any major difference easily.
Last edited:
