newbee...need help with my H1

[Burning oil]

PMD on the intake...Ughhh. where'd you buy it SS Diesel ? That is a good place to start. Putting it on the intake is worse than leaving it on the IP. You need to relocate outside the engine compt. Both Heath and PMDcable.com sell kits as well as others. Some guys even make thier own. I would start there.

Thanks Ace for the referal. I appreciate it very much.
Alpha If I can help let me know.

Edit: I just noticed this had a page two. I did not see you had bought your PMD/cable already.
Glad it looks like you are back up and running again.

 

[Acesneights1]

No prob. Now if you could get Horton to make electric clutchs for the 6.5 again you'd have a real hot item there.

 

[Burning oil]

You lost me on that one, can you learn me?

 

[Acesneights1]

http://www.dieseltowingresource.com/showthread.php?t=11528&page=2
Basically Missy Goodwrench modified a powerstroke electric fan clutch to a 6.5 . I called Horton about making one for the 6.5. They can't make just one. it would have to be a volume order but read what she did. That is the best mod I've seen for a 6.5 in a long time.

 

[Missy Good Wench]

On an H1 it takes some serious looking just to find the engine.

I have seen the underhood on these things and they are tight for sure.

I would mount the PMD on a cooler somewhere up to the front of the engine bay, forward of the lower front edge of the radiator.

There should be a nice little spot there that will get a cool breeze.

The stalling and no/hard restart is definately a PMD symptom.

MGW

 

[Burning oil]

http://www.dieseltowingresource.com/showthread.php?t=11528&page=2
Basically Missy Goodwrench modified a powerstroke electric fan clutch to a 6.5 . I called Horton about making one for the 6.5. They can't make just one. it would have to be a volume order but read what she did. That is the best mod I've seen for a 6.5 in a long time.

OK, I will read the link next. When you said "electric clutch" my mind went to transmissions.

 

[alpha_one]

Burning Oil i will definately will order one from pmd cable.... thanks and to relocate the pmd .as long as it stay in the cool place that would be ok right?

 

[Burning oil]

Burning Oil i will definately will order one from pmd cable.... thanks and to relocate the pmd .as long as it stay in the cool place that would be ok right?

Yep, it should be mounted to a heat sink also.

If you find a good place for it messure the distance of the cable you need. I will make a custom cable for you if needed. I would imagine the 6' er will do, but if you need longer let me know. Thanks.
Leroy.

 

[alpha_one]

Yep, it should be mounted to a heat sink also.

If you find a good place for it messure the distance of the cable you need. I will make a custom cable for you if needed. I would imagine the 6' er will do, but if you need longer let me know. Thanks.
Leroy.

i'll do that tomorrow.........thanks