New Holland L35 skid steer loader revival

[kmad1999]

Single wire to the alternator from the coil is the excitor wire. Apparently signals the alternator when to start charging. Problem was the fuel pump not the distributor. Up and running, thanks to your sketches. Haven't ran the wire from the alternator to the battery yet. Not sure what gauge to use. Thank you for your help.

 

[n8in8or]

Single wire to the alternator from the coil is the excitor wire. Apparently signals the alternator when to start charging. Problem was the fuel pump not the distributor. Up and running, thanks to your sketches. Haven't ran the wire from the alternator to the battery yet. Not sure what gauge to use. Thank you for your help.

Great!! Glad to hear it’s up and running again. I can’t wait until mine is.

 

[Jaryd]

A 4 gauge wire would be fine I would think.

 

[n8in8or]

A 4 gauge wire would be fine I would think.

Oh yeah I missed that part. 4 gauge would be more than enough, you could probably even get away with 10 gauge. I think it’s a 35 amp alternator, but I can’t remember for sure at the moment.

 

[LATE_08]

What happened n8.. I read 15pgs over 8yrs and don't even know if you got it working or not... you gotta fill us in

 

[n8in8or]

What happened n8.. I read 15pgs over 8yrs and don't even know if you got it working or not... you gotta fill us in

Hey there, the project has taken a back seat to a few other projects at the moment. I probably won't be able to get back to it until this coming winter at the earliest. Updates to this thread will resume when I get back to it. Sorry to leave you hanging. BTW, welcome to The Truck Stop!

 

[Husker6.5]

@LATE_08 Which is why on the other thread posts of @n8in8or's of his other continuing on going projects I will throw in the occasional smart-ass comment about "and then there's that skid steer project to finish" or some other snarky comment to that effect. All in good fun, right Nate?

 

[n8in8or]

@LATE_08 Which is why on the other thread posts of @n8in8or's of his other continuing on going projects I will throw in the occasional smart-ass comment about "and then there's that skid steer project to finish" or some other snarky comment to that effect. All in good fun, right Nate?

I've been waiting for that snarky response here for days! Yes, all in good fun.....

 

[WECSOG]

I need to get to work on my own skid steer project. New Holland L783 with a Perkins diesel engine.

 

[Husker6.5]

Definitely post pictures and story as you do, @WECSOG . It MIGHT finally motivate @n8in8or to finally finish his skid steer repair/restoration project after TEN years! If he even remembers what that thing in the far corner of his shed is!

 

[n8in8or]

Skid steer......what skid steer???

 

[Husker6.5]

Skid steer......what skid steer???

You know, that funny-looking yellow thing in the corner of your shed taking up all that room that could be used for storing parts for the three 6.5 truck projects you currently have going on at once.

 

[Will L.]

So, random find on YouTube…