• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Need help identifying a bracket for intake

technically the two you have allocated for heater hose tube are for something else, I think glow plug relay bracket or alternator rear brace. the original heater hose retainer bolts were these weird tall square headed nuts with a floating flat washer on a crimped flange on the bottom of the nut so its free floating but retained. I think the floating washer let the nut tighten without spreading the tabs on the heater tube.
 
Those two you described with the floating washers are the ones outlined in red and are indeed for the heater hose.

Glow plug relay uses regular flange nuts.
 
SnowDrift said:
Those two you described with the floating washers are the ones outlined in red and are indeed for the heater hose.

Glow plug relay uses regular flange nuts.
Click to expand...

Went back and looked, yup, I didnt pay enough attention. lol

I get giddy whenever I find those in a pick and pull, regular flange nuts are easy to find but those are not.
 
You must log in or register to reply here.
Back
Top