• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

My Shop

After it's poured I'll strip the forms and then dig out around the perimeter and install a 16" piece of foam board vertically and a 24" piece horizontally at the base of the concrete. then rebackfill and in the process put some flashing around it similar to what on the existing building
 
After it's poured I'll strip the forms and then dig out around the perimeter and install a 16" piece of foam board vertically and a 24" piece horizontally at the base of the concrete. then rebackfill and in the process put some flashing around it similar to what on the existing building
What type of foam board?

Used to be pink board and blue board weren't good for below grade use. They'd suck up moisture like a sponge and lose their R value.

I used some higher density white board that was supposed to be termite resistant. perform guard eps rings a bell.

I tried searching but couldn't find much information.

I remember they moved from Illinois to Iowa because of Illinois taxes.

There was another plant not far away in Indiana.

Just curious what's out there these days
 
Back
Top