My new truck

[Big T]

Labor
Complete overhaul with updated valve body and pump custom hub and valve body with raised pressures to hold 750 HP

Part	Qty
ET Global Master Kit with pistons, filter and bands	1
CK Performance Master shift Kit Builders kit with Direct clutch and intermediate clutch updates	1
Capital Core Bushing Kit	1
IDK Washer Kit, 4L80E 91-Up 4L8-TWK	1
SONNAX Bearing Kit, 4L80E 1991-Up SBK-G20	1
ROSTRA Speed Sensor, 4L80E Input & Output 91-Up (2 Required) 50-1007/24203876	2
Precision Torque Converter Heavy duty billet stator torque converter 1800-2000 stall Multi disc	1
Core Early 4L80E Core	1
PML Deep Pans Powder coated deep pan	1
ROSTRA Wire Harness, 4L80E Internal (11 Prong) W/CASE Connector 91-03 350-0032	1
AC DELCO ACDelco Professional 214-1878 Automatic Transmission Control Solenoid	1
GM GM Genuine Parts 24230288 Automatic Transmission 1-2 Shift Solenoid Valve	1
GM Automatic Transmission Manual Shift Shaft Position Switch	1
Ac Delco EPC Solenoid 93-2003 (400/4L80E) 1993-2003	1
SONNAX Clutch Hub Kit, 400/425/4L80 Forward (Extreme Duty) 34322-02K	1
TRANS GO Valve Kit, 4L80E TCC Regulator 4L80E-TCC	1
Transgo Actuator Feed Limit Valve kit over size	1

Authorized on 8/17/2023 at 06:07 PM
Job Total$5,430.58
Note:
Custom 4L80 Transmission built for 6.5 diesel 4X4 with 2 speed sensor's deep pan custom valve body and pump rollerized forward hub

Total Labor	$1,211.39
Total Parts	$4,219.19
Total Fees	$66.00
Subtotal	$5,496.58
Grand Total	$5,496.58
Paid To Date	$5,496.58
BALANCE DUE	$0.00

@ak diesel driver @MrMarty51

Would this parts list apply to a ‘94 4L80e 4wd?

 

[Twisted Steel Performance]

I think so, I don't think the trannys changed till 96, obd2 , but I'm not sure.

 

[ak diesel driver]

there are some changes best would be to rebuild the 94 to make sure there's no issues. after 96or97 they're pretty much interchangeable aside from TC