Manual Transmission Issue

[Hill Top]

I have a NV4500, my throw out bearing busted along with the bearing retainer. Ordered a new bearing and retainer but the retainer appears to be wrong. The transmission has been replaced before. I was told their all pretty much the same. Apparently not! How to I get the right part?

 

[Ryanhanson3]

I have a NV4500, my throw out bearing busted along with the bearing retainer. Ordered a new bearing and retainer but the retainer appears to be wrong. The transmission has been replaced before. I was told their all pretty much the same. Apparently not! How to I get the right part?

There's serial numbers on the trans, get the numbers n look for lilmetal tags or stickers... Write down ALL numbers on trans, that should get ya pointed in the right direction... If possible try get a hold of whomever replaced the trans n see what they might have done

Sent from my LG-TP260 using Tapatalk

 

[WarWagon]

And then call these guys for help locating the proper part:
http://www.quad4x4.com/catalog/
http://www.standardtransmission.com/

 

[GM Guy]

pics of the transmission? Also,where are you ordering parts?

 

[Hill Top]

I got the bearing changed and everything working, however now it grinds into third and down shifting into third is almost impossible. Loosing third is why I had this tranny rebuilt before. It's still in warranty but why did this happen? Shattered throwout bearing and now it appears third is out of sync?

 

[WarWagon]

Shifting with a locked up clutch would be hard on things I expect. May have hurt the teeth on whatever meshes for 3rd.