btfarm
America First!
After all these years the leather cover on my driver seat bottom is finally needing to be replaced. Is it easy enough to replace by yourself? Where can you get a replacement cover? The whole rest of the interior is fine.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Leather seat cover replace
- Thread starter btfarm
- Start date
Dieseldad97
I now know why.
Take a look at Utube...the seat shop. They have good instruction vids for you Mike. They also sell all you will need. Here's a link:
Pepperidge
Member Advocate
Mike,
I did my wifes '04 tahoe in a few hours...you have to take out the seat and dismantle it pretty much...
that seller above is about $30 more expensive than all the other sellers...we gt ours from a seller based in Mississippi, and the quality is excellent...now the passenger seat bottom is looking bad as well as the bolsters on the upper drivers seat back where you rub getting in and out...GM leather sucks!
I did my wifes '04 tahoe in a few hours...you have to take out the seat and dismantle it pretty much...
that seller above is about $30 more expensive than all the other sellers...we gt ours from a seller based in Mississippi, and the quality is excellent...now the passenger seat bottom is looking bad as well as the bolsters on the upper drivers seat back where you rub getting in and out...GM leather sucks!
btfarm
America First!
The vid sure was handy. I'll probably put it off for awhile but certainly before fall it'll get done.
Thanks guys!
Thanks guys!
btfarm
America First!
Tim _ is it just the picture that shows a color mismatch? The installation looks great.
It is the picture, I took the bottom cover to the dealer and let the parts manager look at it. He was amazed that it looked like factory and was 200 bucks cheaper. The top was purchased by the dealer at cost plus 6 bucks. So they only made 6 bucks on it. My dealer really treats me very well.
btfarm
America First!
Is that considered the replacement for what was called 'Charcoal' when new? If so, can you share ordering info?
tanman_2006
Just a farm kid...
My bottom is worn but not torn, there is an odd lump in the cushion though.
There is a split in the upper back near my right shoulder from me putting weight there instead on risking cracking my center jump seat lid.
I need to do all new fronts from wear and rears from stains
There is a split in the upper back near my right shoulder from me putting weight there instead on risking cracking my center jump seat lid.
I need to do all new fronts from wear and rears from stains
Dieseldad97
I now know why.
Yeah, I should do my driver bottom foam and cover as well. It's not terrible, but not new anymore.
dark pewter is what is called
hookedup50
Well-Known Member
I'm due for a replacement set on both sides. The seats didn't look that bad until I installed new interior.