Injector nozzles?

[THEFERMANATOR]

Has anybody tried these DIPACO nozzles from the Ebay store? All of my injectors still worked, but one was dribbling fuel out. The nozzles seemed worn when I pulled them apart to clean them, and this is the only stock set I have been able to find.

http://cgi.ebay.com/ebaymotors/6-6-...907Q2em263QQcategoryZ33554QQitemZ230304417519

 

[stacks04]

i would be very reluctant to buy anything injector related on ebay. especially for an lb7 where the repair bill is to big to do the job twice. what are you trying to do? sorry if i missed it i have been gone for a few weeks.

 

[Pepperidge]

I think he's trying to rebuild his injectors...I don't think you can do it by just replacing the nozzles...the needle and seat wearing out is usually the culprit of a bad injector IIRC

 

[THEFERMANATOR]

I had one leaking a little on my donor engine, and I was going to replace just the nozzles instead of the complete injectors. The nozzles have the needle and seat inside of them, so replacement nozzles is pretty much most all of the moving parts inside of them.

 

[Kennedy Diesel]

The Dmax nozzles are not the problem. While there is a "pop" pressure, the fuel rail is isolated from the nozzle by the solenoid so if there is a leak this likely where the problem is.