High lift cam ideas

[6.2 turbo]

This is the cam card from my first cam. It had way more power,and super quick spool up. But had egr from overlap,so it started hard ,and ran off of its own exhaust . Basically it ran horrible untill the turbo spooled.

 

[6.2 turbo]

So I would like to try it again, with like .600 lift , and stock duration. A long time ago I had checked things and it looked like it would work , with different springs obviously. Feel free to post up any cam specs you might have,since one of our cam threads got deleted .

 

[ak diesel driver]

I'm going to probably just do a stock cam but with higher ratio rockers

 

[6.2 turbo]

Yea,but that will increase lift only a little bit.

 

[Twisted Steel Performance]

Hers one...

 

[ak diesel driver]

A little more duration and lift but not much. How much do the p400 cams run Chris?

 

[Twisted Steel Performance]

ALL THE CAMS ARE THE SAME, NO DIFFERENCE, SAME AMG PART NUMBER....

 

[6.2 turbo]

I like how the p400 opens exhaust later. I think this is one of Heath's tricks . I bet the exhaust opening point could be 10 degrees later,for more torque. This would dramaticaly change turbo exhaust turbine requirments.