Big T
Well-Known Member
Mine is the new ATT kit. I had to cut one 45 back to reduce height
Of CDR hose which stopped oil leakage around valve cover grommet.
Of CDR hose which stopped oil leakage around valve cover grommet.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Got my ATT today
- Thread starter ak diesel driver
- Start date
jeffrey98335
Member
Following along.
Looking forward to seeing the benfits, and would love to get rid of my GM2 Turbo.
Looking forward to seeing the benfits, and would love to get rid of my GM2 Turbo.
Slim Shady
DEATH BEFORE DISHONOR
- Messages
- 1,523
- Reaction score
- 32
Hey guys I send a seperate instructional image to show how to trim the intake hose adapters. The hoses I use are five ply and should be stable, te problem arises with the oil from the crank case vapor. The amount of oil makes a big difference in how much oil can seep into the spaces or voids. Once oil gets on the compressor housing hose mount it must be cleaned off with brake cleaner or the like to restore the dry surface. Nothing sliker than silicone hoses and oil coating. Hope this helps. Been away, lost.