ak diesel driver
6.5 driver
can anyone verify if the rods , crank are different than the stock 6.5s
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
gep engine internal differences
- Thread starter ak diesel driver
- Start date
racer55
Member
Should be identical.
It's possible that some bolt holes could be imperial vs metric-not sure?
The only difference is the strength of the block and thickness of the deck ASFAIK.
Peninsular Diesel offers a forged steel crank and is the only off the shelf supplier that I know of.
It's possible that some bolt holes could be imperial vs metric-not sure?
The only difference is the strength of the block and thickness of the deck ASFAIK.
Peninsular Diesel offers a forged steel crank and is the only off the shelf supplier that I know of.
Will L.
Well-Known Member
I don't want post the link to non supporting vendor, but I have read the differences on sites. Maybe Leroy has the info?
Iirc, crank, rods, cam, block, heads are all different metulurgy.
Iirc, crank, rods, cam, block, heads are all different metulurgy.
ak diesel driver
6.5 driver
so send it to me 
Missy Good Wench
Wild Blonde from Cloud Mt
Dims are all the same on the rods and crank.
Metalurgy is likely different on the crank
Rods and cam never had issues
Metalurgy is likely different on the crank
Rods and cam never had issues