06 LBZ 2500HD
New Member
anyone have any good videos on the best/easiest way to change your fuel filter
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm just 5' 8" and I stand on a milk crate, pull the intake hose and change it just as it is from the top. The only mod I did is to bend the one AC line that is in the way about 3/8" so I can get the filter out. A pivoting handle filter wrench and WIF sensor wrench are all the tools I need. About a 10 min job once you get used to it.
Welcome to The Truck Stop!
I always went in from the fender well. I thought that was a ton easier.
anyone knw how to reset the dash reading for the fuel filter i tried leaving the batteries disconnected for a few hours but that didnt seem to cut it
The O ring can be a PITA because of the way it is sometimes packaged. I always tried to pull it out in advance and lay it on the bench with something flat on top of it to get it to regain it's proper shape.
i went from the top, i had to take off the intake hose to make things easier, but all in all it was fairly easy the only issue i had was the large gasket didnt want to go in the grove so it took 2 times of putting on the filter but all in all it worked out for the better i have been learning a lot about working on my truck since i got back from afghanistan and i wanna thank you all for your help