• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Electric fuel pump/lift pump

Twisted Steel Performance

Twisted Steel Performance

Anything worth doing is worth overdoing.
Vendor
Messages
4,173
Reaction score
8,250
Location
Pauline, SC
I've been doing a good bit of research in the lift pump area, yes their are the high dollar units that move lots of fuel per hour and cost a good bit and have lots of bells and whistles we just don't need, even if using a maxed flowing injection pump..

So, I have narrowed down the list to one I plan to use for less than 150$..

This one, American made best I can find, several different models to chose from as well...

Dura-Lift – Facet-Purolator

www.facet-purolator.com www.facet-purolator.com

Made by Facet rebranded under several names like Holley...

Mighty Mite 12-430 33 GPH Holley Mighty Mite Electric Fuel Pump, 9-11.5 PSI

Holley Mighty Mite pumps are suited for tough, hard-working applications. From truck refrigeration units, marine generators, and gasoline and diesel industrial applications, these pumps have the proven performance, quality, and dependability that you can count on. They are self-priming and...
www.holley.com www.holley.com

Thoughts???????????????????????????????????????/
 
I have been searching for several weeks now for a lift pump less than 200$ that I thought would last a while. I never did see these pumps show up while searching.

I like the first pump better but you never know, the Napa pump could last for years and years.
 
The mighty mite with the square body I remember trying when we tested the different liftpumps. It barely hit 9psi and was under 6 in short order. It’s over all lifespan wasn’t much better than the Delco- so because of price I ruled it out for the db2 also.

There is another mighty mite made by holley labeled as MrGasket (yes they own them too) that has a green body. They live a long time but flow volume is too low- so lower than advertised gph and pei.

I called holley not even a month ago - he didn’t say anything about that first one you showed. It sure hits some happy specs. And the 80 micron screen isn’t shabby. I couldn’t see, is there a water drain on that clear base? I wonder about warranty numbers on it.
 
Twisted Steel Performance said:
I've been doing a good bit of research in the lift pump area, yes their are the high dollar units that move lots of fuel per hour and cost a good bit and have lots of bells and whistles we just don't need, even if using a maxed flowing injection pump..

So, I have narrowed down the list to one I plan to use for less than 150$..

This one, American made best I can find, several different models to chose from as well...

Dura-Lift – Facet-Purolator

www.facet-purolator.com www.facet-purolator.com

Made by Facet rebranded under several names like Holley...

Mighty Mite 12-430 33 GPH Holley Mighty Mite Electric Fuel Pump, 9-11.5 PSI

Holley Mighty Mite pumps are suited for tough, hard-working applications. From truck refrigeration units, marine generators, and gasoline and diesel industrial applications, these pumps have the proven performance, quality, and dependability that you can count on. They are self-priming and...
www.holley.com www.holley.com

Thoughts???????????????????????????????????????/
Click to expand...

Is the input/output port sufficient?
 
NVW said:
I didn't see if they were flow on fail, I'm sure you would have looked into that. Price is right. 👍
Click to expand...

pasted from their FAQ section...

Can fuel be pulled through the pump when the pump is off?

Yes, providing that you choose a part number that does not have an internal positive shut off valve.
 
Jaryd said:
I have been searching for several weeks now for a lift pump less than 200$ that I thought would last a while. I never did see these pumps show up while searching.

I like the first pump better but you never know, the Napa pump could last for years and years.
Click to expand...


I know a few Ford diesel owners that have used that first pump for many many years with not a burp from it.. their are several farm straight trucks here that use it also, none have any complaints... The solid state drive is something most others don't offer....
 
Twisted Steel Performance said:
This is even a direct replacement for the stock lp...

Click to expand...
I have one of these facet fuel pumps setting in a coffee jug all sealed up to keep out the dirt.
it was on My 2000 K3500 when I had bought the truck. I installed a fuel pressure gauge and it scared the crap out of Me, at highway speeds, about 70 MPH, it would run on zero pounds of pressure. It would hold about 5 to 6 pounds in town driving.
I immediately got the lift pump and harness kit from Leroy and got that installed.
Just happy it didn't take out the IP.
The previous owner of the truck had installed the pump brand new just before I bough the truck, so, I knew it was not an age thing for the low pressures.
If and when the Carter lift pump fails I will try one of those other Facet Duralift pumps. it seems to be a real nice option.
 
Twisted Steel Performance said:
Yes John, you are right, guess I'll find out sooner or later. Nothing wrong with yours by the way.
Click to expand...
Yeah no worries there. We intentionally only carry premium pumps now to avoid callbacks and issues. We tried to supply the budget options and it took multiple years off our life expectancy :banghead:
 
I had a (unnamed nonsite vendor) HO on mine, it was great. Back then, it was like $75. Now, it's $120. I'm pretty sure it was just a Carter HO with a sticker on it, but it did what it was supposed to, and it was flow-on-fail ...most of the Carters weren't, which is an issue for a DS4.

I just couldn't see spending $500 on a lift pump.
 
Last edited:
You must log in or register to reply here.
Back
Top