boccheballs
New Member
I am new to efi and really just messing around trying to learn the software and how to change things on a small scale. My question is i have a dsp5 tune from a very good tuner installed on my truck and everything runs great, but #5 is maybe a little hot. My set up is
stock
50
80
100
150
so if i open the tune tool and load that dsp file i go over and open the custom calibrations and go to folder 4 which is my pos.#5. That displys about 15 items that have been changed from the base tune. If i double click one at a time and change all the tables (ALL NUMBERS) by -10% and then save tuning file as a new name, would that be the proper way to drop the power level a little bit? And then what is considered a drastic change on something like that,10% 15% 20%???
Thanks
brian
stock
50
80
100
150
so if i open the tune tool and load that dsp file i go over and open the custom calibrations and go to folder 4 which is my pos.#5. That displys about 15 items that have been changed from the base tune. If i double click one at a time and change all the tables (ALL NUMBERS) by -10% and then save tuning file as a new name, would that be the proper way to drop the power level a little bit? And then what is considered a drastic change on something like that,10% 15% 20%???
Thanks
brian