Dyno results

[littleboy]

Step 1 with a 4911 pump.

 

[WECSOG]

That's a lot of power from a 6.5!

 

[DieselAmateur]

What block and mods/ upgrades? Turbo? GM/ GEP? Great numbers for sure!

 

[ak diesel driver]

Chassis or engine Dyno?

 

[littleboy]

This particular engine is a p400 and this was only 140 ccs of fuel from a 4911 pump I threw together quickly. And it was run on a chassis dyno.

 

[ak diesel driver]

So those are rear wheel numbers? Seems like pretty good power

 

[littleboy]

This is just round one. Next year will have a lot more fuel and fullsize air to air cooler.

 

[DieselAmateur]

Which turbo?

 

[Rockabillyrat]

Verlin is that you?

Even with a 1.07CF your over the 350hp mark. That's impressive from a .310 pump! Nice work.

 

[Will L.]

Nice. “Only 140ccs”. Haha. I like how you think!

 

[littleboy]

The dyno was having issues that day and only read power to the mid 3k rpms but we are fueling to 5k. Dyno operator felt bad and said he feels like it was reading low by 25 to 50hp. Hard to say. This is a baseline so we have a solid starting point

Verlin is that you?

Even with a 1.07CF your over the 350hp mark. That's impressive from a .310 pump! Nice work.

 

[Quadstar Tuning LLC]

Which turbo?

It has our Super 60 turbo and 6L90 transmission swap

 

[Rockabillyrat]

If it was ran on the reality check mobile dyno from Diesel Dr that thing gets dragged all over the east coast. Gets used and abused all year. They definitely have had issues at a few events Ive been too.

 

[littleboy]

If it was ran on the reality check mobile dyno from Diesel Dr that thing gets dragged all over the east coast. Gets used and abused all year. They definitely have had issues at a few events Ive been too.

That is the dyno. Everytime i see it an an event it has trouble.

 

[93detroit]

Does it have the center mount that you were working on a few years ago?

Good to hear from you!

 

[littleboy]

Does it have the center mount that you were working on a few years ago?

Good to hear from you!

This is all stock other than turbo and fuel system. My truck gets the centermount setup. We had it on one of our trucks with a 71mm turbo and had fun hurting feelings . Wish we had dynoed that thing because it had no problem running alongside 600+ hp trucks and soundly beating anything less.

 

[dieselfuelonly]

This is all stock other than turbo and fuel system. My truck gets the centermount setup. We had it on one of our trucks with a 71mm turbo and had fun hurting feelings . Wish we had dynoed that thing because it had no problem running alongside 600+ hp trucks and soundly beating anything less.

Verlin, I miss that truck for sure. Definitely a head turner and agreed the dyno results on that one would have been exciting to see!

 

[DieselAmateur]

Got pictures of the centermount setup? Would love to know if it's possible to do without insane fabrication skills, my tombstone stick welder can only do so much...¯\_(ツ)_/¯

 

[Will L.]

Yes, pics please! If you can add a tape measure in there showing height too that could be helpful.

 

[MrMarty51]

Watching this thread.