Cheap Racors

[Matt Bachand]

God those things scare me......especially in the NorthEast with all the sand and salt.


what do you guys think about mounting the filter housing in the engine compartment. Would the walbro have enough balls to draw that far of a distance and then back up to the filter manager???

Distance isn't really a factor as much as verticle lift .... So i think it will pull fine.

 

[SmithvilleD]

Racor mounted to front bed u-channel crossmember

:mad2:No album for Smithville, he must have removed his pics.

Sorry, been meaning to redo my album. Here are a couple pics. It's bolted to the front bed crossmember, in front of the fuel filler. Similar location to what you mentioned.

 

[Rhinopkc]

I was just under my truck, and that's exactly the spot I came up with. Where do I get the connector for the heater?

 

[Matt Bachand]

I was just under my truck, and that's exactly the spot I came up with. Where do I get the connector for the heater?

IF you're referring to the mating pigtail, let me know, as I also am in need. Winters coming!

 

[Turbine Doc]

Go to racor site to get the p/n and any racor dealer can order it, but racor prices direct are kind of high, possibly you can read the p/n off the pig tail and reverse identify it at electronics shop that sells "weather-pak" type connectors