buddy
Active Member
We know he was using a DS4 that only puts out 80mm3/(1000cycles) so how much power can you get our of just diesel and a DS4?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Bill Heath - 149mph yesterday at Bonneville!
- Thread starter McRat
- Start date
Odlaw
Redneck
149 mph? didn't he run a good bit faster last time out? 156 rings a bell but heck, I'm gettin old and starting to forget stuff 
NVW
Well-Known Member
Somewhere I read that Bill knows how to get 93mm3 out of a DS4
Woody35
Active Member
yeah with a 94 hd ds4 pump you can get 93mm3 but thats only at 2000 rpms i thought.
Paveltolz
Доверяй, но проверяй
149 mph? didn't he run a good bit faster last time out? 156 rings a bell but heck, I'm gettin old and starting to forget stuff
October 09's highest speed was 155mph and, as stated, was with the 6.2 w/6.5 heads etc. Year before that at the World of Speed ’08, the truck registered 150, 153 and 158 respectively with the 6.5 block.
Bill's planning on the World of Speed 10 event this year so we'll see how it all shakes out with the improvements/adjustment applied to this year's race package. I'm thinking positive thoughts.:thumbsup:
Paul
dangerousdave
1994 6.5 Suburban
Thanx for the update. I've looked and searched for news of this on the web, with no success. Do you know where we might be able to follow him on the web?
Paveltolz
Доверяй, но проверяй
The World of Speed 2010 kicks off in August.
If Bill doesn't post any updates from the track, it will have to come from team members either with him at the Flats; from forum members who are in contact via cell phone while he's there (coverage is surprisingly good out there) or wait 'patiently' for him to post something when its all over with the tech results either in the forums or MaxxTorque articles.
I'm planning to particpate as photographer and part-time team member this year (Army scheduling permitting) so I'll post track results etc as time permits. Not sure about pre-race news/posts etc. but the time to write subtracts from the time availabel to prepare for the race. I'd bet MaxxTorque will run at least one full article and an update in the months prior.
I do know, from personnal observation, that Bill appreciates all the support and well wishes from everyone.
If Bill doesn't post any updates from the track, it will have to come from team members either with him at the Flats; from forum members who are in contact via cell phone while he's there (coverage is surprisingly good out there) or wait 'patiently' for him to post something when its all over with the tech results either in the forums or MaxxTorque articles.
I'm planning to particpate as photographer and part-time team member this year (Army scheduling permitting) so I'll post track results etc as time permits. Not sure about pre-race news/posts etc. but the time to write subtracts from the time availabel to prepare for the race. I'd bet MaxxTorque will run at least one full article and an update in the months prior.
I do know, from personnal observation, that Bill appreciates all the support and well wishes from everyone.
635
New Member
Paul, I will see you there!