• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

adding factory power windows and locks

dmaxx3500

Deputy
Messages
3,204
Reaction score
6
Location
chicago,
well,im in the middle of doing this to a 2008 ext cab 3500 diesel ,im using gm factory parts,so far so good,the hardest part is im using a 2008 1/2 ton gas dash harness [ used a gm service manual and added the 6 extra wires],but you need everything,dash wiring-door wiring,door panels-door switchs,power regulaters,,ive also added factory
1.navigation radio
2.power locks
3.bluetooth
4.trailer brake controller
5.digital a/c heater controls
6.fog lights
7.back-up sensors
8.remote start
9.lighted sunvisors
10.homelink/garage door opener
11.2012 grille and bumper
12.cadillac/corvette remote fobs

everything works great,the hard thing is tearing apart a truck[seats ,carpeting,headliner,dash,hvac system,bed],,the only thing left is a rear power slider[i dont know if i really want one]
 
im doing this because i have all the parts and i like a challenge,and i couldn't find a truck like i wanted last sept,when i needed a truck ,i'll take a few pics but it just looks like a stock ''lt''
 
Back
Top