?? about db pumps output cc's or displacement per rev

[high toned sob]

Hi,
Wondering about what the DB's will put out in terms of fluid per revolution. Just a rough idea of the 2829 and 2831. Also if the DS pumps info is available would be handy.

If not per revolution because of load variance how about cm3 every 500 rpm at 1/4, 1/2, 3/4, and full fuel? Just kinda looking for basic info. Maybe even GPM at full load 1/4, 1/2, 3/4, and full throttle?

thanks all,
mike

 

[littleboy]

2831 turned up as far as the screw will allow can put out around 90cc's of fuel per 1000 revolutions. Cc's per 1000 revolutions is a standard measurement in the injection pump world.

 

[79jasper]

Not sure how people here feel about Conestoga diesel but he'll straight up tell you what his pumps put out.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[WarWagon]

Not sure how people here feel about Conestoga diesel but he'll straight up tell you what his pumps put out.

Sent from my SAMSUNG-SM-G890A using Tapatalk

They are better than ebay... Some members here are running the Moose pumps on their 6.5's.

 

[79jasper]

I know he sells great products (from the Ford idi side) and definitely stands behind his products.
Just didn't know if there was any big "brand loyalty" going on. Lol
When I get my 6.2 back into something, I'll end up with some of his stuff.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[littleboy]

Anyone who is good with injection pumps will gladly tell you what the pumps put out. We typically don't measure them at part throttle but if it's requested we can . I've seen 160 cc's out a 2831 pump without doing any signifigant mods .