• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

88-98 Chevy/GMC guys.....

D

DunesRunner08

Banned
Messages
1,417
Reaction score
0
Location
Phoenix, AZ
So I finally have good news for you guys.... I need to get 4 or 5 guys with deposits and we will produce the bumpers.... once all the deposits are in, you are looking at 6 to 8 weeks until you have the product, abour 3 weeks until you see the mock up photos.....

here is an example of what we will be similar to, but we will definately fit the grille much better than this one does...

p2-01.jpg


Call me if you have any questions or would like your name on the list.....
 
IMO it looks way better than the newer model truck ones...doesn't hang God awful low and doesn't have all that dead space where the winch goes...
 
Looks great Bill! Might want to post this in the 6.5 section or have it moved.. I know a lot of the 6.5ers dont leave that section..
 
no it wasnt a photoshop project... the bumper posted was the only one that was remotely close to what we will do and I wanted guys to see what the "style" would look like... our bumper will fit much better, and follow the lines much better than this one.... as for price, they will be around the same as what everything else is going for.... it takes the same amount of labor and same amount of material.....
 
In My Opinion,

Put a place to mount our PMD and provide an option for those of us with intercoolers or winches. Also, slim it down a bit.. my truck doesn't need a beard!
 
it will be more slim... I know what I am looking at but I cant photoshop work a crap so I cant post it...LOL





...edit.... what is a PMD? LOL
 
PMD-Pump Mounted Driver or when you take it off the pump FSD-Fuel Solenoid Driver. It is the electronic device that closes the fuel solenoid to allow the distributor type injection pump to begin the high pressure cycle to fire the injector.

See http://www.heathdiesel.com/P/HDP1280/

Heath's solution is to bolt it to the skid plate.
 
DunesRunner08 said:
Anyone Who Wants To Pre-order Will Receive A Discount.... Pm For Specifics
Click to expand...

Actually, would be happy to just understand what normal retail is...

Competition runs around $1500-1800 depending on style, sans shipping.

Are these $2000, $1000??

-Rob :)
 
bill the pmd is normally relocated to the bumper or grill on these trucks with a heat sink added to it, somewhere that it will get plenty of airflow and stay cool.
 
I will figure that out when I get one in the shop... maybe I will consult you guys a little more.... as for the price turbo, PM on the way
 
You must log in or register to reply here.
Back
Top