Trainedpro
New Member
- Messages
- 15
- Reaction score
- 0
My 96 suburban is losing power after a hour or so of driving.
I still get plenty of boost and the RPM's increase but the truck does not move.
Temp. spikes 10-20 degrees. Couple people have mentioned "Limp Mode"
does anybody know anything about this?
I'm getting 12-14psi of boost and an occasional P0236 code.
Also, Looking to do a ECM upgrade, anybody use the Heath MaxETorque?
or the SSdiesel supply 80hp kit?
THanks
Nick
1996 6.5 Suburban 217Kmiles
#9 Resistor, FSD Heat sync - remote mount
New waste gate solenoid
New K2500 Wheels
I still get plenty of boost and the RPM's increase but the truck does not move.
Temp. spikes 10-20 degrees. Couple people have mentioned "Limp Mode"
does anybody know anything about this?
I'm getting 12-14psi of boost and an occasional P0236 code.
Also, Looking to do a ECM upgrade, anybody use the Heath MaxETorque?
or the SSdiesel supply 80hp kit?
THanks
Nick
1996 6.5 Suburban 217Kmiles
#9 Resistor, FSD Heat sync - remote mount
New waste gate solenoid
New K2500 Wheels