• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

3" downpipe,where in Can??

Bison, I ordered from SSD. Pipe turned into a $170 US delivery to my door. Been educated since by the good folks here. Whatever you buy, do not use UPS to ship across the border. They will tack on obscene "handling" charges.

As far as I know, no one does a true 4" DP for the 6.5
I think this is because of the proximity of the firewall. You could customize the DP, but you would need some odd bends, which I think would be more restrictive than a free flowing 3" DP.

A body lift might allow for a 4", but then you have issues with the radiator brackets. I don't know for sure, just read up on around a dozen different lifts, and they all had the same reason for not selling body lifts. If it is the rad brackets, I am sure that someone here with good fab skills could rig up a kit to be used.
 
Non Typical said:
Bison, I ordered from SSD. Pipe turned into a $170 US delivery to my door. Been educated since by the good folks here. Whatever you buy, do not use UPS to ship across the border. They will tack on obscene "handling" charges.

As far as I know, no one does a true 4" DP for the 6.5
I think this is because of the proximity of the firewall. You could customize the DP, but you would need some odd bends, which I think would be more restrictive than a free flowing 3" DP.

A body lift might allow for a 4", but then you have issues with the radiator brackets. I don't know for sure, just read up on around a dozen different lifts, and they all had the same reason for not selling body lifts. If it is the rad brackets, I am sure that someone here with good fab skills could rig up a kit to be used.
Click to expand...
I have been bit before on the shipping charges.I aint to keen on a repeat.

The warpspeed is a 3.5"downpipe(swaged down at the turbo flange)with 4" piping to the rear.(only kit they sell).

I am capable of making my own ,but figured for a 100 bucks for a ready made one ,it was not worth it.(takes a fair amount of time and farting around to build one)
 
bison said:
Sven,Its time you come to this side of the pond, you know more about this country than me it seems :D
Click to expand...

Easy to say, but not so easy in reality ! If you want to get parts for a US-Car or Truck, cheaper and faster as here in germany, you have to investigate in the US and Canada where to get them. So this could be a reason why......


Cu,
Sven
 
Chevylover said:
Easy to say, but not so easy in reality ! If you want to get parts for a US-Car or Truck, cheaper and faster as here in germany, you have to investigate in the US and Canada where to get them. So this could be a reason why......


Cu,
Sven
Click to expand...

Sven,

If you need help with parts let me know. I have an American address here in Germany. The hardest part would be getting you what you ordered since you are over 5 hours away. I will help any time I can till October when I leave.

Marty
 
FWIW i have a 3-4" FloPro DP~back W/ straight thru muffler - Pretty good quality, I bought it from another member on the "Place" $275.00 shipped - brand new in the box, no crossover........Jim, you looking to get rid of that XOver?
 
LOL, oops. I thought you were talking about ditching it. :D

Once the 95 is rolling again, I will be doing exhaust work. It has a 3.5" exhaust on it currently that I installed from the 93 a few years ago, but that is going to be dumped. I'm thinking 4" with a straigh flow muffler. And of course, a new DP as it has the original one still.
 
You must log in or register to reply here.
Back
Top