Not mine
K35 air box setup, manual waste gate actuator, and a wicked wheel off my 96 k3500 All for $200 +shipping. Switched to a hx35 so this stuff is taking up space
https://www.facebook.com/groups/551256768344622/permalink/3386433654826905/?app=fbl
Back before I knew better, I bought a crashed 1999 K1500 6.5 diesel Suburban for the transmission. It would start and move, but was totaled
The intent was to install that transmission into the 1998 K2500 6.5 Diesel Suburban.
I never got to it. Sold everything. The guy that bought everything...
Shocker hitch
I never saw these before.
I also saw an adapter that turns a bumper pull into a gooseneck
bpconvversions.com
https://www.google.com/search?q=adapter+that+turns+a+bumper+pull+into+a+goodeneck&client=ms-android-tcl-rvo2b&sourceid=chrome-mobile&ie=UTF-8...
Does anybody want a hydronic tubing unroller?
Made for 300' of 1/2" pex tubing.
Has been used for bigger tubing.
Kind of like a mini field tile or inner duct unroller.
I can get pictures if anyone is interested.
Near Clifton, Illinois
Like this...
2016 F250 6.7 4x4 Short bed, Crew Cab, Platinum
Are there differences between brakes on the F250 and F350?
Can the F250 brakes be upgraded?
Does anybody use Powerstop Brakes?
I've used them on other vehicles and been happy
https://www.amazon.com/dp/B0BRR42KYV/?tag=powsto08-20
Has anyone body mounted a hose reel outside of their shop
We're been talking about it for years.
We have a hose reel that's not in use.
Do they sell covers for outside use?
Or would It b better to buy a retractable air hose reel made to be mounted on an Exterior wall?
I could make a cover...
what are the fuel line connectors on a1963 John Deere 4010 diesel?
Are they AN8?
I don't know my fittings.
I want to go from the factory fuel line to a 5/16 hose barb for a while. And then easily go back to factory.
Thanks
Toro 220D model 30794 serial 86000
Wiring issues. Previous owner made a
Mess.
Ground cable is disconnected from the battery.
Pulled the 5 or 6 wire plug off the ignition switch.
Between the battery ground post and every pin on the starter plug, there is voltage showing.
Even from the valve...
I have a 1975 Ford 3550 backhoe with a cav4 pump.
No start today.
No fuel at the first injector.
No fuel at the injection/ injector line I Took loose at the pump.
I have fuel at the bleeder on the side of the pump.
I read about another bleeder, but haven't found it yet.
I know nothing...
It's been a decade
I bought a. 1998 Toro 223D with a Mitsubishi L3E engine.
Model 30223 Serial # 80205
I think/hope it needs glow plugs. I haven't looked at it yet.
Are there self regulating glow plugs available?
Are either of these numbers self regulating?
GLOW PLUG
Toro Part #...
2016 Ford F-250 Super duty 6.7 Platinum.
Got tires today.
Any opinions on what to buy for parts?
Need brake pads. The rotors look good.
The right lower tie rod end is loose.
Have an oil coated oil pan. What are the likely suspects?
Wife's truck. She's never checked the oil, so I have no...
I have a set here. I believe From Leroy.
I'm not sure which vehicle it was for. So I may need elbows to go to the block on the 1994 K3500.
Somebody somewhere once mentioned elbows that could thread in and had a lock nut or something to keep them pointed the right direction?
Does anybody know...
1994 K3500 NV4500
I wasn't feeling great and had a kid take the starter off the 1994 6.5 diesel.
He was having trouble getting the starter out and took the slave cylinder loose.
I just went to start it for the first time since. The hydraulic clutch pedal is rock hard and will not depress...
I'm looking for some blue & yellow, 5/16 & 3/8 heat shrink ring terminals / eyelets, with the larger Outside diameter rings. 10 or 20 each.
The rings on the terminals I had were about the same size as a washer. 5/16 was probably close to 5/8" diameter
And the 3/8" was probably about 11/16.
I...
What's everyone do to protect their starter wiring from the heat from the downpipe?
The corrugated tubing poking out from under the starter heat shield was a little crusty
I just installed a 3" diamondeye downpipe on the 1994 today.
I noticed the flange that goes to the turbo was considerably smaller outside diameter that the downpipe that was previously on there and smaller than the old OEM that I have in the shed.
Is that going to cause me issues?
It looked...