Search results

Hi again gentlemen...I have two more questions if you don't mind:. 1. Turbine Doc has suggested that I move the SS Diesel FSD away from the manifold to under the front bumper. My question is how do I do this, and how and where do I mount it??? Is there a link you can refer me to where this is...

Gentlemen, I've got good news and 6 words to say to y’all - thank you, thank you, thank you - my car is running!! It was so simple - the ECM fuse was blown. Even though I had checked it last night in a hurry, I apparently didn't check it properly and didn't visually notice a small break on the...

JIFaire, the engine does crank strongly - it just won't fire up. The wait to start light (same as the glow plug light?) does not come on, nor does the Check Engine Light. I checked all the fuses in the fuse box under the hood, including the ECM fuse (I think) and the fuses are fine. Do you...

In reply to the question from JMJ Net, the ground for the SSD PMD heat sync is on the heat-sync itself. I tried to move it back to the spot on top of the injector pump, but the black wire is too short - do I need to add more wire or how can I get it back on to the pump? Could you also please...

Thanks everyone for the fast responses. Could I please ask you two silly questions: where do I find the fuse for the PCM/ECM and where do I find or how do I check the ignition switch? I have a 1995 GMC Suburban....I have checked all the fuses in the fuse box which is located under the hood on...

I never have checked codes on my diesel - I'm not too mechanically inclined and maybe a bit unsure how to do it. Do you feel that doing this is going to be the best/only way to trouble-shoot my starting problem? Thanks again,

Hi everyone at the Dieseltowing Resource, I am new to this forum and sure would appreciate your urgent assistance with a stalling problem. I have a 1995 GMC Suburban 6.5 TD with 112 000 miles. In the last month, I installed 2 new batteries, a new starter, a new 4” Warpspeed (Diamond Back)...