Close.
The pattern and inside color is the same. Where yours have the dark gray mine are light.
I had thought of doing all the sound insulation as you did in the cab. I bought new carpet and it had a thick pad on the back of it. That may have helped quite a bit. All the noise in my truck...
@MrMarty51
This is the correct Diameter.
Link is for the size. You can buy it wherever you'd like.
https://www.amazon.com/dp/B07GHZBWWS/?coliid=I1HMST7N3UQM1S&colid=3Q011L9XRZ4JI&psc=1&ref_=lv_ov_lig_dp_it
I have also always run exhaust manifold gaskets on the 6.5 and never had one blow out. Not that my history is good since I was blowing head gaskets with ever other tank of fuel it seemed.
Maybe we are old enough to use them now. 🤣
I agree about having a covered cargo area. I would like to find a cap for mine at some point. I should probably start with a bed first.
This truck has no name?
There will be many of us disappointed if the bed is not off or the rear end is not pulled out and on jackstands. :D
Does this truck have 4.10 gears?
Where did the headlight and turn signal covers go??
That cap, hmmmm.... I don't believe that you are seasoned enough...
You have peaked my interest in the marine pump.
Are the modifications that you speak of something that you are offering?
Do these modifications void the 1 year warranty?
Nice work on the brake lines.
I have a bunch of mirrors left over from a home remodeling project. I'll send them your way so you can lay them under your truck at Cars and Coffee. :D
Dorman 645-500 is the electrical connector that fits the fan clutch.
It is available from RockAuto and Amazon.
https://www.rockauto.com/en/partsearch/?partnum=645-500
https://www.amazon.com/dp/B00E58LAXE/?coliid=I20ROKADWGSJLX&colid=3Q011L9XRZ4JI&psc=1&ref_=lv_ov_lig_dp_it
I just went through this same situation.
I'm am not suggesting to buy it from here and it looks like you have on the way, but all the dimensions are listed. The measurements are the diameter where the belt rides. These alternators typically come with a 57mm pulley. The pulley required is 62mm...