• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. marvgarr

    68 C10 Chevy 6.5T

    Thanks. Here is the crossover ceramic coated and v band welded in.
  2. marvgarr

    68 C10 Chevy 6.5T

    Here are some pics of what I have done latly. The first pic is the circuit breaker for the glow plugs. Next is the oil pressure gauge line. The rest is the exhaust cross over I made and the v band flange I welded on to the turbo. I still need to ceramic coat the cross over and put the bottom...
  3. marvgarr

    Poor to no acceleration Problem?

    Any codes? Change the fuel filter and make sure no water in the fuel. Remember water is heavier the diesel so it will pump water from the tank first.
  4. marvgarr

    Tuning

    Slim hasnt been here since april. I will check with leroy.
  5. marvgarr

    Tuning

    Any idea on how to optain a good definition file?
  6. marvgarr

    Tuning

    I was wondering if anyone would help me with tuning my own chip? I don't want this thread off topic like the last one. I don't want to copy any ones just want to clear out some and change some.
  7. marvgarr

    68 C10 Chevy 6.5T

    O I forgot to take pics of that. I'm sorry it slipped my mind. Lets start from the beginning. Ok from my distribution block I am running a 6ga wire to a 50A circuit breaker. Then a 6ga wire from the breaker to the glow plug relay. Then the 8ga wire wrapped in the high heat sleeve to the 14ga...
  8. marvgarr

    Hello

    Welcome.
  9. marvgarr

    68 C10 Chevy 6.5T

    Well I used 8ga to each bank. I soldered each terminal for glow plug relay. I then used 14ga to each glow plug all soldered. I wrapped it in a high heat sleeve. The sleeve is good for a constant 1200 deg and 2000 deg intermediate. I used factory gm push in clips to hold harness.
  10. marvgarr

    68 C10 Chevy 6.5T

    I wired up the glow plugs, made a new harness. I wrapped the harness in a high temp sleeve. I also used push in clips to hold the harness to the injector line brackets. It came out pretty good. I hooked up a test battery and checked all the electrical. I got a code 29 and code 49 I didn't hook...
  11. marvgarr

    68 C10 Chevy 6.5T

    That truck reminds me off my 71 c20 4spd I had. Nice looking truck.
  12. marvgarr

    68 C10 Chevy 6.5T

    Thanks. Your the one who had the 6.5 camaro. I loved that car it was nicely done.
  13. marvgarr

    Hello

    Welcome. I have had my share of fun with those 3208s. I still have a blown up one in the middle of the yard.
  14. marvgarr

    68 C10 Chevy 6.5T

    Thanks.
  15. marvgarr

    68 C10 Chevy 6.5T

    I found some old photos from when I started here they are.
  16. marvgarr

    68 C10 Chevy 6.5T

    That there is a good looking truck.
  17. marvgarr

    68 C10 Chevy 6.5T

    Thanks, I checked out your build I like the red it looks great.
  18. marvgarr

    68 C10 Chevy 6.5T

    The gears are 3.73. Yea this is the 5th one I have had I love these body styles. Thank both of you for the kind words.
  19. marvgarr

    Crazy Turbo Options

    It did when it was gated should be better now.
  20. marvgarr

    68 C10 Chevy 6.5T

    Sounds a little high for me. Offer 600.
Back
Top