Search results

Yes it has factory 4.10s It had factory leather, the front was destroyed by the previous owner. I replaced with drivers power suburban seats. IP is original, I have put a mixture of power service and 2 stroke on almost every tank since purchased. The truck has surface rust on frame from...

No, I will not yank off emission crap till warranty expires. I just want a bolt on. Maybe a all black tip will look better. Don't want it too yellow.

The length of the tip is 17". The diamter at the end, center, and front is 15 3/4". The tip going across is right under 5". who is good at math?

They got rid of the bazooka tip. I need to go out and measure the one that is on there. Here is a picture, It looks shiny in the picture. It is not chrome. Just don't make no sense. You get a gas High Country and it comes with a chrome tip.

When I came back from Germany in 2009 I sanded down the hood and rattle can sprayed it. It needed to be redone years ago. Paint damage on front of bed. The drivers side fender was fully replaced and painted in 2010. The passenger side fender has top sun fade damage. and For a 20 year plus...

This might take more than one post. Here is the drivers side hood and fender. Passenger side hood and fender. Here is the hood. The truck came from the factory with fiberglass steps that went all the way down the side of the truck. I took them off, here is the damage they left behind...

It does not grind for me. I will take them now. Give me a few.

Tops of front fenders are bad in some small areas. The Texas sun is the culprit for destroying the paint. I will go out and get some close ups if wanted. The trans and clutch are strong.

Got some new floor mats for my truck. I went with the husky Liners. They fit nicely, and will keep crap from accumulating and staining my carpet. Here is the front drivers side. Front passenger side Back seat, it covers the entire carpet area. I park in a gravel parking lot at work...

cool

Miles are 223,990 Just had an oil change

Bump

I wish!

Got to get a hitch first. I don't want rails in the bed. I plan on going with the B&W gooseneck turn over ball with the companion 5th wheel hitch.

I did not use gaskets on the 2006 I did. Just a metal plate. It was hard enough to get in there.

Thank you Mike!

here is two more pictures.

It has done nothing but rain since I purchased her. When the sun comes out I will picture away! I already ordered the husky floor liners for it. I will post pictures of them also.

sometimes, but, glad to have an auto. I got a bad back with nerve issues in both legs.

Thank you and Thank you!