Search results

i found the relay and i unpluged it and used a jumber wire from the Orange wire hot at all times, to both the grey unlock, and tan lock; and still nothing they wont move at all. i can lock and unlock all the doors relativly easily but the power locks still dont work. guess ill try shooting...

thats what i figured Thanks

well i pluged the other switch in and still nothing. i did notice that the first time i hit the switch they move just a little bit and after that they dont move at all

got it how is the wire attached to them is it a crimp on style.

where do you get the terminals to add to them? do you add to the ICFB how do you get it out to work on it dosent seem to be a lot of slack in the wires

what is a jy fuse block

there seems to be quite a few open slots in both the underhood fuse block and the in cab fuse block. is it possible to add to them to keep things neat. For example in the UHFB there is a spot labled for heated mirrors (i have added heated mirrors and a timed relay set up, in a differnt...

iv added the gallon of coolant last week and the heater works great now. iv been thinking about the whole situation and i just remembered that the night the heat quit blowing i had turned on the rear heat. The rear heat works great now and i have not lost any coolant. how dose the rear heat...

i saw some on ebay that said glass as well didnt think any thing of it when i order mine but looking back that might be worth the extra money

this looks like what i bought but its a different seller. i have had 2 sets like these and i ordered a set of smoked ones for my buddy, they suck not bright at all

i ordered a lower grill filler piece, the plastic part that the grill clips into from them, nice part seems sturdy and is way better than the broken one i had and couldnt find any where else. i ordered their heavy duty head light harness and it was deffiantly made in china i didnt think it...

I had the wife leave the Burb at home today so it sat all night since i parked it after returning home from doing the pressure test. i drained a little oil out of the drain plug and this is how it looked. Deffinatly looks like there are water bubbles in it. just to clearify the pan was...

i ve read that this water and oil that iv seen could be from condisation in the block (i fear this is not that) but an oil sample would tell me if it is glycol or just condensation wouldnt it

well i just bought an 04 Suburban z71 and drove it home from MO a 3.5hr trip of 250mi. every thing ran great never had any troubles ran right around 200* the whole trip. that was thursday, all seemed fine friday and saturday then sunday night we where coming home from my parents and the...

i didnt even think about that but i have the passanger door pannel off so the switch is disconected i bet that is what the problem is

where is that in the in cab fuse pannel? which relay is for the locks. going to try and find a wireing diagram for it when i get off work

My Door locks on the crew cab will not work at all. i hit the button and hear the relay click but the doors will not lock or unlock. the locks seem to move freely and it is all 4 doors, which is making me wonder if the relay is bad the locks seem to try and move a little but not enough any one...

if you where on this end of the state we have a great diesel shop that works on about 80% duramax trucks

on my old 93 i changed my torsion keys to the re-indexed ones and then cranked them hard and got 3in. and i added an add-a-leaf in the rear to make it even. truck sat nice but it was a ruff rider. didnt bother me to much makes you remember you are driving a truck not a sedan! any way right...

ya i got it done finally. have a couple places where i trimmed a little to much but it sure dose look nice now that its all done, just have to put a few trim pieces back on.