Search results

Over the last week or so,,, we did the full power steering hydro boost system flush and fill. Had all 4 tires balanced and rotated. Oil change, Air Filter, and a quick detail for upcoming trip. Discovered my front driveshaft is both seized and has both bad u-joints. Run tires up to 55psi, and...

Got the HM5. I change oil on time more than miles,, no worries.

heck yeah,, oil filters $1.10. $2.93 for air filters,, I ordered 4 HD air filters,, and 4 HiMileage filters, and a new oil filler cap. $28 delivered! Just paid $3.77 for one PH5 at wally world yesterday.

good read here fellas,, Mine is starting to start hard when really hot out. Runs like a champ still. but on 90F day's it'll heat soak in an hr or so,,, then roll over 2 times longer than normal. Haven't had to try the water trick,,,,yet. My local shop that reman's and is standyne shop,, has...

I do use the rainX wiper jiz,,, what I'm wondering is maybe the wiper motor, at 180,000 miles is getting enough play in the parts, to cause this. Either motor it self, or maybe the little plastic cups on the linkage Arms. It has only really started over the last few months. Annoying for the...

lower your volume first. then tell me what's worn out here? new glass 9 months ago,, new blades 3 weeks ago,,

I've done a ton of them over the years, reg hydraulic jack under middle of door,, 2ft pry bar pop spring out,, hit pin's on small side with air chisel bit,, ,, that was broken and had the fut hacked off it years ago, pop those pins on the ends,, knocks knurled heats out of holes,, then pull...

Well I did the repairs,,,,, ABS light went off and stayed off. then the test drive,,, and about every other time I stop, the last 5mph,, the abs act's all goofy, pulsing and vibrating. Not really liking that much. So I pulled te 60amp abs fuse. The new ceramic brake pads, seem to be doing...

in case others come here for info related to abs sensors,, here's more of what I've found, for 95 OBD1 I pulled codes on mine,, I got 21 22 23 25. The light has been on for almost the whole time I've had the truck. the Zone has new ones for 35 ea,,, and I'm doing rotors, new loaded Napa...

on top tof the thermostat housing,,, should be a little nut, you can loosen,, to let the air out.

Thanks guys,,

yeah sorry bout that,, it's a 1500

ater it rains,,, the one will bite,, on easy braking for a few miles,,, then clears up. I did the bigger wheel cylinders a year or so back,,, but think maybe the axle seal is leaking,,as the old whl cyl's were not wet at all. So refresh me here,,,, exactly how much fun is it to do the seals...

HOpe you did the OPS relay mod at the same time! ;)

Heres what I did on my 95: http://www.thetruckstop.us/forum/threads/fan-clutch-replacement-mod.35349/

I've been wanting to make one, with the duramax fan, and mod'd new clutch,, I only see, 195 on the gauge during the hottest part of summer, and in the winter,, I only get to the first big mark between cold and 200. so 170ish? which I know don't help my mileage any. But when I have my plow on...

Patrick at Walking J don't anymore? Bummer,, I believe there once was thread that had a description of the fittings needed,,, before he came out with his kit. Heres my write up from when I did it, you can see his # in his biz card in one of the kit pics...

I know how you feel,,, my first 6.5 let go, to a horrible vibration,, and noise, while doing 75 on the eway. The reman International diesel engine, made it a few thousand miles, and did the same thing @ 55mph. Praying that never happens again. Glad you found a good soul to help you,, and get...

If you gonna DIY the bed liner,, then check this thread out about the U-pol Raptor bedliner kit I used,, it's been on a while now,, and looks the same as day one!! Great stuff. Awesome looking truck,, you might want to do as I did, and spray rockers and up 6 in on both sides,,, kinda a rock...

I had at one point, found a fella a few towns over from me, who worked at the Aluminum extrusion plant,, and was making his own heatsinks,, that were 2x6x12,, I would by 4 of them,, he would cut them to 6in for me,, So I would sell them on ebay,, for a bit of a profit,, still use the first one...