Search results

I thought there were 2 pumps that were the same. The only difference being, one pump had a spin on fan and the other a bolt on fan

Could a local hydraulic line shop. Make something up? Maybe with a flex line inthe mix someplace for easier installation

Jumper the lift pump, run the IP return line to a container. Open the drain T - run it to a container. Run until you're out of air. Close the drain T, crack the bleeder on top of the filter. Hopefully your filter is one with the real life bleeder - some don't have a hole through the bleeder...

Did you try inlinetube.com

Just unplug the lift pump until you're ready for it

Still is

Shocker hitch I never saw these before. I also saw an adapter that turns a bumper pull into a gooseneck bpconvversions.com https://www.google.com/search?q=adapter+that+turns+a+bumper+pull+into+a+goodeneck&client=ms-android-tcl-rvo2b&sourceid=chrome-mobile&ie=UTF-8...

On behalf of everyone Thanks for trying

You have to make the others wear swimming trunks while you shower?

I've used both. I use dialectic grease on about every connection

Yep. I test for continuity at the plug. If no continuity, I make sure the cord didn't get unplugged from the block heater. Made that mistake once. Cost me about 5 minutes.

Often they go bad at the plug. It's about as expensive to buy a good male plug as it is for the new cord...

I don't think that's what Marty meant by having the head worked over. And that is why we always had to wear hard hats safety glasses and hearing protection. Do when we bumped out noggins, it just jammed our heads down betwixt our shoulder blades. I wonder how many neck injuries that...

I had mine set higher. I think it was 22 or 2300 PSI. I think balanced makes a difference

I guess, we're just half deaf. We never noticed until the exhaust fell off the truck. But then, it was all we had in the 1990's into the 2000's Nothing to compare it to

I use synthetic sponges. The kind with the tiny holes.

Did you not have a muffler? I don't remember our suburbans or anything being that loud.

Marvel also works for rust prevention. I used to use anything and everything handy, whenever I was under a vehicle. People that I hired to work n stuff hated following me. If there wasn't never seize or locktite present. It probably had a coat of some kind of stuff rust prevention. I use a...

I order Norseman drill bits from Fairbury Fastener, Fairbury, Illinois Fastenal, - only get their good bits. Their cheap bits are crap. MSC, Granger, McMaster Carr, Kimball Midwest, Lawson Products, all sell quality cutting tools. You can also order online from the tool trucks...

I order Norseman drill bits from Fairbury Fastener, Fairbury, Illinois https://www.fairburyfastener.com/