Search results

I think if you post a few pics of your turbo with the stock filter box might help, side view, front view, etc. Back when I did all this with my 92 I used a "cobra adapter" and it was simple. That air box was a flat style filter so yes it was a little different.

Maybe don't look in the mirror so much ...🤔

Maybe you shouldn't leave your dad's shop in a mess....

My builds have 65-80 psi hot idle... Cold they often peg the pressure gauge.... My stock 220k mile 93 has 50 hot idle pressure...

It's move in weekend at the new shop.

No sir, the diamater of the groved part is what matters so the rpm is correct.

A bulkhead fitting would work well and be sealed up.

Lights done, walk in door next ....

🥵 my arms couldn't take anymore.

Ceiling is done, waiting on the lights to arrive, can roll up door and walk in door maybe next weekend.

I can't see the wheels good enough to know for sure but I'd guess they are 6 lug, that makes me think 3500lb axles, and add to that the jack is a light weight puney at best, all this leads me to think even if the load was towards the rear it would still be over weight. A bundle of 4x8x1/2"...

Theirs room, not to stand but if needed I can use plywood to support me on top of the rafters and crawl around.

Not sure what your asking? The wiring for lights is already in place in the ceiling, the light strips plug in and will hang down via 6" cable, lights haven't arrived yet. The rafters are beefy and tied to the truss and the trusses sit on the walls. No movement at all, I jacked each truss up...

Ya mind expanding on this comment more.... I don't see where anyone has made out of line comments, sometimes the truth hurts....

Ceiling going up .....

Looks like the TRL is overloaded a good bit from here, maybe a 8-12k TRL. Sheetrock is heavy...

If it were me I'd unload it to another TRL. Then maybe you can pull the broken TRL to have it rebuilt.

The copper washer is only used on certain adapters, 95 & earlier, I don't know the adapter part numbers. The washer goes between the bolt head and adapter. I think the way to tell is if a o ring is on the bolt and inside the housing where the bolt goes in, no washer.... But I don't have a...

There's a copper crush washer that should be their also.

If needed I will, it's strong as it is, it will hold me and Brenda and not move at all...